Changes

==== Overview ====

==== Overview ====

Sticker making is the most frequent use of the vinyl cutter. Uploaded graphics can be in any format, but .pdf is preferred. This is due to the vector format of .pdf files, and lets them be uploaded directly to Roland Cut Studio. Other formats need to be converted to vector form in Adobe illustrator 2017. The vinyl cutter needs to be loaded and setup before a graphic can be sent to it and cut out. Once cutting has been completed, it also needs to be reset and turned off.  

Sticker making is the most frequent use of the vinyl cutter but it can be used for other applications as well depending on the type of material being cut. For cutting materials, vinyl rolls can be be found in the cabinet below the computer and loaded onto the material rack at the back of the machine. However, for most projects a small piece will be sufficient and it is recommended that you use the scrap pieces in the bin to the right of the computer.  Uploaded graphics can be in any format, but .pdf is preferred. This is due to the vector format of .pdf files, and lets them be uploaded directly to Roland Cut Studio. Other formats need to be converted to vector form in Adobe illustrator 2017. The vinyl cutter needs to be loaded and setup before a graphic can be sent to it and cut out. Once cutting has been completed, it also needs to be reset and turned off.  

==== Demonstration ====

==== Demonstration ====