1,947
edits
Changes
Jump to navigation
Jump to search
Line 53:
Line 53: − + Line 67:
Line 67: − + − − − − − −
→Demonstration
Demonstrate you can safely setup the saw and rip a board. You will then proceed to cross cut one of the remaining piece.
Demonstrate you can safely setup the saw and rip a board. You will then proceed to cross cut one of the remaining piece.
1. Ensure that the material you are cutting has at least one straight edge and no nails or foreign objects. The straight edge will slide against the fence when ripping.<b/r>
1. Ensure that the material you are cutting has at least one straight edge and no nails or foreign objects. The straight edge will slide against the fence when ripping.
2. Measure the width of the board and determine the width of cut.
2. Measure the width of the board and determine the width of cut.
10. Make sure you keep a firm hold on the material and do not stop feeding the material until it has passed beyond the blade.
10. Make sure you keep a firm hold on the material and do not stop feeding the material until it has passed beyond the blade.
11. It is helpful to have someone assisting on the back side of the saw to help hold material being fed off the table.
11. It is helpful to have someone assisting on the back side of the saw to help hold material being fed off the table.
12. When you are done with the saw cut press in on the paddle switch to turn off the saw.
12. When you are done with the saw cut press in on the paddle switch to turn off the saw.
==Certification==
==Certification==