Changes

=== Balance control ===

=== Balance control ===

The balance control is adjustable to provide additional oxide removal (more cleaning) or lesscleaning based on the condition of the material being welded.

The balance control is adjustable to provide additional oxide removal (more cleaning) or less cleaning based on the condition of the material being welded.

=== Syncro Start™ ===

=== Syncro Start™ ===

== Procedure ==

== Procedure ==

# Place the fume hood over the area you will be welding at

# Place the fume hood over the area you will be welding  

# Select electrode that is adequate for your application of material

# Select electrode that is adequate for your application of material

# Grind electrode to a point. ( This gives a smaller and more directed arc)

# Grind electrode to a point. (This gives a smaller and more directed arc)

# Insert the electrode into the collet of the torch

# Insert the electrode into the collet of the torch

# Attach ground clamp to table (ensure ground contact surface is clean)

# Attach ground clamp to table (ensure ground contact surface is clean)

# Clean material to remove any oxidizing and or oil residue

# Clean material to remove any oxidizing and or oil residue

# Turn on the welder and adjust----------

# Turn on the welder and adjust----------

# Hold the electrode in your dominant hand ( ensure it can move freely)

# Hold the electrode in your dominant hand (ensure it can move freely)

# Hold electrode about an inch away from the metal

# Hold electrode about an inch away from the metal

# Using the foot pedal to control the voltage, start off with the foot pedal half way down to start a puddle on the material.

# Using the foot pedal to control the voltage, start off with the foot pedal half way down to start a puddle on the material.

# Once the puddle is formed, dab the filler rod into the puddle

# Once the puddle is formed, dab the filler rod into the puddle

# Moving along the material, walk the electrode back and forth across the puddle while dabbing the filler into the pool

# Moving along the material, walk the electrode back and forth across the puddle while dabbing the filler into the pool

# Close gas cylinder valve

# Close gas cylinder valve