Changes

Jump to navigation Jump to search
no edit summary
Line 111: Line 111:     
==Troubleshooting==
 
==Troubleshooting==
There are two things in particular that could keep you from successfully soldering: an untinned tip and a loose tip. If the tip is not shiny silver, then place a little solder on the tip and wipe it on the sponge. Some soldering irons allow there tips to be replaced for the sake of having different shapes. If the iron is not heating up and you are using this type of iron, it is possible that the tip is not inserted into the iron fully. To fix this, grab some pliers, grip the shaft and push it in fully.
+
There are two things in particular that could keep you from successfully soldering: an untinned tip and a loose tip. If the tip is not shiny silver, then place a little solder on the tip and wipe it on the sponge. Some soldering irons allow there tips to be replaced for the sake of having different shapes. If the iron is not heating up and you are using this type of iron, it is possible that the tip is not inserted into the iron fully. To fix this, grab some pliers (so you don't burn your hands), grip the shaft and push it in fully.
    
==Maintenance==
 
==Maintenance==
 
====General maintenance====
 
====General maintenance====
   −
Insert text
+
The maintenance for the soldering iron generally consists of keeping the soldering station cleaned, stocked, and the iron tinned.
    
====Specific Maintenance Tasks====
 
====Specific Maintenance Tasks====
Line 124: Line 124:  
!Done By
 
!Done By
 
|-
 
|-
|Sample
+
|General Cleaning
|Sample
+
|After each use
|Sample
+
|Student
|}
+
|-
 
+
|Tin Soldering Iron
[[{{#show: {{FULLPAGENAME}}|?Has icon|link=none}}|100px|left|top|{{#show: {{FULLPAGENAME}}|?Has icondesc}}]]
+
|As needed
[[{{#show: {{FULLPAGENAME}}|?Has image|link=none}}|thumb|upright=1.5|{{#show: {{FULLPAGENAME}}|?Has imagedesc}}]]
+
|Student
'''Soldering''' is a process in which two or more items (usually metal) are joined together by melting and putting a filler metal (solder) into the joint, the filler metal having a lower melting point than the adjoining metal. Soldering differs from welding in that soldering does not involve melting the work pieces. In brazing, the filler metal melts at a higher temperature, but the work piece metal does not melt. In the past, nearly all solders contained lead, but environmental and health concerns have increasingly dictated use of lead-free solder for electronics and plumbing purposes.
+
|-
<br />
+
|Stock solder, solder wick, sponge
 
+
|As needed
The current Ace of the {{PAGENAME}} is '''{{#show: {{PAGENAME}} |?Has ace.Has name}}''' ({{#show: {{PAGENAME}} |?Has ace.Has email address}}).<br />
+
|Ace
__TOC__
+
|}__TOC__
 
  −
== Maker Hub Soldering Irons ==
  −
{{#ask:
  −
  [[Is soldering iron equipment::True]]
  −
  |format=ul
  −
}}
  −
 
  −
The Weller irons use a resistive tip to generate heat. By varying the power through the tip, the temperature can be controlled. The Metcal uses an inductive tip that is tuned to be at one temperature.
  −
Important Note: One should never use the abrasive tip tinner on the Metcal tips. This can damage them.
  −
 
  −
== Solders ==
  −
There are different types of solder available in the [[Maker Hub]]. The standard hand solder that is used is a 60/40 blend. When using solder paste, we typically use a 63/37 variety.
  −
 
  −
== Documentation ==
  −
 
  −
* [[Media:WellerBetterSolderingBooklet.pdf|Better Soldering Booklet]]
  −
<!--
  −
* pdf comic book of operations
  −
-->
  −
 
  −
== Training ==
  −
 
  −
Soldering is not difficult, but understanding some basic concepts will go a long way toward a successful experience. As part of your training, you will need to read some documentation and watch some videos.
  −
 
  −
<!--
  −
=== Documentation ===
  −
* [[Media:WellerBetterSolderingBooklet.pdf|Better Soldering Booklet]]
  −
-->
  −
=== Videos ===
  −
After scouring the web for examples of soldering training, we really liked the lessons captured in the [https://www.youtube.com/playlist?list=PL926EC0F1F93C1837 PACE] series, despite the fact that they were filmed in the 80's. These videos are well produced (for something possibly older than your parents) and have a lot of good information. The quizzable information is in the very first, fifth, and sixth videos, but the other videos have great examples of good and bad soldering joints.
  −
<!==
  −
Another more modern video from [https://www.beautyandthebolt Beauty and the Bolt] is also insightful. TThis video is a little more modern, and a good resource, but not as technically interesting. It talks a bit about desoldering as well as soldering wires together and how to use heat shrink and electrical tape.
  −
==>
  −
 
  −
A more modern series is available from [https://www.howcast.com/guides/930-how-to-solder Howcast]. It wouldn't hurt at all to watch this series, but we will just focus on a couple for the quiz.
  −
 
  −
Finally, there is an official training video from the [[Maker Hub]] that is tailored to our specific space and equipment. This video will give you the information you need to perform the live solder demonstration required for your soldering certification.
  −
 
  −
==== PACE Basic Soldering Series ====
  −
 
  −
This nostalgic set of [https://www.youtube.com/playlist?list=PL926EC0F1F93C1837 videos] from PACE are quite old, but surprisingly still quite relevant. The style makes you think that you will be getting ready to watch an old Disney cartoon - you aren't. Don't get disappointed.
  −
<!--
  −
* [https://www.youtube.com/watch?v=vIT4ra6Mo0s&index=1&list=PL926EC0F1F93C1837&t=1s Basic Soldering Lesson 1] - "Solder & Flux" (20:44)
  −
* [https://www.youtube.com/watch?v=Mrhg5A1a1mU&index=2&list=PL926EC0F1F93C1837&t=0s Basic Soldering Lesson 2] - "Soldering To PCB Terminals" (6:50)
  −
* [https://www.youtube.com/watch?v=_GLeCt_u3U8&index=3&list=PL926EC0F1F93C1837&t=0s Basic Soldering Lesson 3] - "Cup Terminals" (4:19)
  −
* [https://www.youtube.com/watch?v=hvTiql-ED4A&index=4&list=PL926EC0F1F93C1837&t=0s Basic Soldering Lesson 4] - "Bifurcated Terminals" (2:45)
  −
* [https://www.youtube.com/watch?v=sN3V8hMiUb4&index=5&list=PL926EC0F1F93C1837&t=0s Basic Soldering Lesson 5] - "Hook and Pierced Terminals" (1:19)
  −
* [https://www.youtube.com/watch?v=AY5M-lGxvzo&index=6&list=PL926EC0F1F93C1837&t=0s Basic Soldering Lesson 6] - "Component Soldering" (4:33)
  −
* [https://www.youtube.com/watch?v=VgcPxdnjwt4&index=7&list=PL926EC0F1F93C1837&t=0s Basic Soldering Lesson 7] - "Integrated Circuits: The DIP-Type Package" (2:36)
  −
* [https://www.youtube.com/watch?v=sTv3gK9tAKA&index=8&list=PL926EC0F1F93C1837&t=0s Basic Soldering Lesson 8] - "Integrated Circuits" (1:16)
  −
* [https://www.youtube.com/watch?v=Nq5ngauITsw&index=9&list=PL926EC0F1F93C1837&t=0s Basic Soldering Lesson 9] - "Integrated Circuits: The Flatpack & Other Planar-mounted Components" (6:20)
  −
-->
  −
===== Basic Soldering Lesson 1 =====
  −
This is by far the longest of the videos at (20:44), but also packed with the most pertinent information. It provides great background on solder, flux, wetting, and then mechanics of the iron and the joint. We do not have the student handbook that is mentioned. We suspect that you can manage without that.
  −
Here are some key ideas that you should watch for:
  −
* What is solder?
  −
** What temperatures do the different solders melt at?
  −
* What is flux?
  −
* What is wetting?
  −
* What are the different aspects of a soldering iron?
  −
  −
 
  −
{{#evu:https://www.youtube.com/watch?v=vIT4ra6Mo0s}}
  −
 
  −
===== Basic Soldering Lesson 2-5 =====
  −
 
  −
These videos are worth watching, but they are not essential for this training.
  −
 
  −
* [https://www.youtube.com/watch?v=Mrhg5A1a1mU&index=2&list=PL926EC0F1F93C1837&t=0s Basic Soldering Lesson 2] - "Soldering To PCB Terminals" (6:50)
  −
* [https://www.youtube.com/watch?v=_GLeCt_u3U8&index=3&list=PL926EC0F1F93C1837&t=0s Basic Soldering Lesson 3] - "Cup Terminals" (4:19)
  −
* [https://www.youtube.com/watch?v=hvTiql-ED4A&index=4&list=PL926EC0F1F93C1837&t=0s Basic Soldering Lesson 4] - "Bifurcated Terminals" (2:45)
  −
* [https://www.youtube.com/watch?v=sN3V8hMiUb4&index=5&list=PL926EC0F1F93C1837&t=0s Basic Soldering Lesson 5] - "Hook and Pierced Terminals" (1:19) 
  −
<!--
  −
{{#evu:https://www.youtube.com/watch?v=Mrhg5A1a1mU
  −
}}
  −
 
  −
===== Basic Soldering Lesson 3 =====
  −
 
  −
This video shows a good example of melting solder before inserting wire.
  −
 
  −
{{#evu:https://www.youtube.com/watch?v=_GLeCt_u3U8}}
  −
 
  −
===== Basic Soldering Lesson 4 =====
  −
 
  −
This video is similar to Lesson 2, but again, great examples of good vs. bad solder joints with wire.
  −
{{#evu:https://www.youtube.com/watch?v=hvTiql-ED4A}}
  −
 
  −
===== Basic Soldering Lesson 5 =====
  −
 
  −
Very short video. Just a different type of wire joint.
  −
 
  −
{{#evu:https://www.youtube.com/watch?v=sN3V8hMiUb4}}
  −
 
  −
-->
  −
===== Basic Soldering Lesson 6 =====
  −
Good explanation of a "semi-clenched" method for soldering an axial-lead component. This technique allows the component to be held in place for soldering without any extra tape or glue (or a potentially burnt finger).
  −
{{#evu:https://www.youtube.com/watch?v=AY5M-lGxvzo}}
  −
 
  −
===== Basic Soldering Lesson 7 =====
  −
Applying the "clenching" idea to an IC. Typically, we will not use this technique, but will instead hold the part and "tack" these same leads with solder - just to hold it. The rest of the video has great examples of IC's being soldered.
  −
 
  −
{{#evu:https://www.youtube.com/watch?v=VgcPxdnjwt4}}
  −
 
  −
===== Basic Soldering Lesson 8-9 =====
  −
We don't normally see too many of these any more, but again, nice examples of good joints that are similar to components we still use.
  −
Rather than flatpack or planar components, we generally use "surface-mount" now. But, the soldering part is still useful to watch. The techniques are similar. Our PCB's will generally come "pre-tined" and the component leads are already bent, but the rest of the soldering is the same.
  −
 
  −
* [https://www.youtube.com/watch?v=sTv3gK9tAKA&index=8&list=PL926EC0F1F93C1837&t=0s Basic Soldering Lesson 8] - "Integrated Circuits" (1:16)
  −
* [https://www.youtube.com/watch?v=Nq5ngauITsw&index=9&list=PL926EC0F1F93C1837&t=0s Basic Soldering Lesson 9] - "Integrated Circuits: The Flatpack & Other Planar-mounted Components" (6:20)
  −
<!--
  −
{{#evu:https://www.youtube.com/watch?v=sTv3gK9tAKA}}
  −
 
  −
===== Basic Soldering Lesson 9 =====
  −
Rather than flatpack or planar components, we generally use "surface-mount" now. But, the soldering part is still useful to watch. The techniques are similar. Our PCB's will generally come "pre-tinned" and the component leads are already bent, but the rest of the soldering is the same.
  −
{{#evu:https://www.youtube.com/watch?v=Nq5ngauITsw}}
  −
-->
  −
 
  −
==== Howcast How to Solder ====
  −
This set of [https://www.howcast.com/guides/930-how-to-solder videos] from Howcast is worth watching, but we will only highlight a couple of them here that talk about removing solder.
  −
 
  −
===== How to Remove Solder =====
  −
{{#evu:https://www.youtube.com/watch?v=-lnRf2biz50}}
  −
 
  −
===== How to Remove Through-Hole Components =====
  −
{{#evu:https://www.youtube.com/watch?v=zjQf0ajBYmM}}
  −
<!--
  −
==== Beauty and the Bolt ====
  −
Not as technical, but there are some good tips for soldering different things here, as well as desoldering things. There are also a couple of items that should be addressed.
  −
* When soldering the vector board, she does not use flux. This works as the surfaces are clean and there is flux in the rosin-core solder she is using. However, using flux is always recommended.
  −
* She shows how to solder solid-core wire together and then she uses [[https://en.wikipedia.org/wiki/Heat-shrink_tubing heatshrink tubing]] to cover the joint. Heatshrink is a wonderful thing, and the way that she used it was correct. However, the method she used only works well if the wire is not connected to other things. Often, the wires are connected on either end, and the splice is being performed to complete a connection. If one waits until after soldering before adding the heatshrink, it ... uh ... no worky. The heatshrink should be put on first, run down the wire out of the way, and then the wire can be twisted and soldered. After it cools, slide the heatshrink up and use the heat gun to shrink it.
  −
 
  −
 
  −
{{#evu:https://www.youtube.com/watch?v=ZwU9SqO0udU}}
  −
 
  −
-->
  −
 
  −
==== Maker Hub Video ====
  −
This video contains specific information for soldering in the Maker Hub as well as a basic overview of what will be expected in your live demonstration.
  −
 
  −
{{#evu:https://www.youtube.com/watch?v=4v98_f7JFdo}}
  −
 
  −
=== Certification ===
  −
 
  −
==== FoxTale Course ====
  −
To obtain certification for using the soldering irons in the Maker Hub, you will need to complete the [https://foxtale.georgefox.edu/moodle/course/view.php?id=23483 Foxtale course: Maker Hub - Soldering Iron]. This course contains a quiz with questions from the videos. When the quiz has been completed, you can sign up to perform the soldering demonstration.
  −
 
  −
==== Demonstration ====
  −
For the live demonstration you will receive a small PCB and a few components and will be required to solder the components to the circuit board. The circuit kit contains a 555 timer IC, 3 resistors, a capacitor, and LED, and a 9V battery connector. When completed, the system will slowly blink the LED. The schematic of the circuit is shown below. To find pin 1 of an IC, reference the [https://www.evilmadscientist.com/2010/basics-finding-pin-1 internet].
  −
 
  −
==== Components ====
  −
 
  −
<gallery>
  −
File:blinkypcb.jpg|[[Media:Blinky.zip|PCB]]
  −
File:ne555.png|[https://www.digikey.com/product-detail/en/texas-instruments/NE555P/296-1411-5-ND/277057 555 timer]
  −
File:res1k.jpg|[https://www.digikey.com/product-detail/en/stackpole-electronics-inc/CF14JT1K00/CF14JT1K00CT-ND/1830350 1 K<span title="&amp;Omega;">&Omega;</span> resistor]
  −
File:res470k.jpg|[https://www.digikey.com/product-detail/en/stackpole-electronics-inc/CF14JT470K/CF14JT470KCT-ND/1830415 470 K<span title="&amp;Omega;">&Omega;</span> resistor]
  −
File:cap1uF.jpg|[https://www.digikey.com/product-detail/en/UVP1H010MDD1TD/493-12697-1-ND/4328314?utm_campaign=buynow&WT.z_cid=ref_octopart_dkc_buynow&utm_medium=aggregator&curr=usd&site=us&utm_source=octopart 1 <span title="&amp;mu;">&mu;</span>F capacitor]
  −
File:red_led.jpg|[https://www.digikey.com/product-detail/en/lite-on-inc/LTL-4223/160-1127-ND/200395 red LED]
  −
File:battcon.jpg|[https://www.xump.com/science/9V-Battery-Snap-Connector-Leads.cfm?SID=12&gclid=EAIaIQobChMI04mUoZaF2QIVAm5-Ch0pDgDrEAQYAiABEgKI1_D_BwE 9V Battery connector]
  −
File:Blinking LED Circuit.gif|Completed PCB
  −
</gallery>
  −
 
  −
==== Schematic ====
  −
[[File:soldering_course_circuit.jpg|left|500px|Blinking LED schematic]].
  −
<!--
  −
==== Working Circuit ====
  −
[[File:Blinking_LED_Circuit.gif|left|150px]]
  −
-->
 
479

edits

Navigation menu