Changes

Jump to navigation Jump to search
Line 63: Line 63:     
====Operation====
 
====Operation====
 +
 +
<u>wind the bobbin</u>
 +
 +
- once you picked the type/color of thread spool, first get some of it loose and out and secondly place it on the skinny tub. Then, add the spool cap. the side will depend on the type/ style of thread spool you picked.
 +
 +
- as you follow the guide images, put the thread around the metal know. Then slide the thread through one of the holes in the bobbin and place it in the small metal tube that its on the right top f the machine. Slide the bobbin winder shaft over  to lock it.
 +
 +
- hold the thread for couple seconds at the begging as you press the presser foot gently and slow. Once it took off evenly or uniform, you can let go of the thread  and go faster. with the presser foot
 +
 +
- cut the thread once you are done and place the bobbin unto the machine. the top drop in bobbin is covered by a plastic cover that you can remove by gently pulling the black small square to the right. Drop the bobbin and wrap the thread around a clip is also under the plastic cover. finally, put the cover on.
 +
 +
<u>thread the machine</u>
 +
 +
- grab onto the thread from the thread spool and run the thread through the knob and going down then up, following the image guide around and make sure it is catching all parts. At the end thread the needle 
    
====Demonstration====
 
====Demonstration====
Demonstrate you can safely setup the sewing machine and sew a mini pillow. You will also need to demonstrate how to thread the machine.
+
Demonstrate you can safely setup the sewing machine and sew a mini pillow. You will also need to demonstrate how to wind the bobbin and thread the machine.
    
====General Procedure====
 
====General Procedure====
411

edits

Navigation menu