2,297
edits
Changes
Jump to navigation
Jump to search
Line 10:
Line 10: − + − + − + − + + + + + + + + + + + Line 32:
Line 42: − * [https://images.homedepot-static.com/catalog/pdfImages/5d/5da1c223-3df7-4236-8b34-34eb1641764a.pdf Manual]+ + Line 46:
Line 57: − *1. Release the locking lever by rotating it counter-clockwise.+ Line 62:
Line 73: − + + + − 3. Adjust the height of the hold down and blade guard for the thickness of material you are using.+ − − 4. Make sure the air blow-off nozzle is pointing at location in front of the blade. This will remove dust from the cut lines and make it easier to follow your lines. − + Line 97:
Line 108: − + +
→Documentation
|Has imagedesc=
|Has imagedesc=
|Has description=
|Has description=
|Has certification=
|Has certification=https://georgefox.instructure.com/courses/1197
|Has make=Excalibur
|Has make=Excalibur
|Has model=EX-21
|Has model=EX-21
|Has ace=
|Has serial number=EX2100170900211
}}
|Has ace=Needed;Needed
[[{{#show: {{FULLPAGENAME}}|?Has icon|link=none}}|100px|left|top|{{#show: {{FULLPAGENAME}}|?Has icondesc}}]]
}}[[{{#show: {{FULLPAGENAME}}|?Has icon|link=none}}|140px|left|top|{{#show: {{FULLPAGENAME}}|?Has icondesc}}]]Make: {{#show: {{PAGENAME}} |?Has make}}
Model: {{#show: {{PAGENAME}} |?Has model}}
Serial Number: {{#show: {{PAGENAME}} |?Has serial number}}
Ace: {{#show: {{PAGENAME}} |?Has ace.Has name}} ({{#show: {{PAGENAME}} |?Has ace.Has email address}}).
Location: {{#show: {{PAGENAME}} |?Is located in facility}}
==Description==
[[File:Excalibur EX21 Scroll Saw Image.jpg|thumb|Excalibur EX-21 Scroll Saw]]
[[File:Excalibur EX21 Scroll Saw Image.jpg|thumb|Excalibur EX-21 Scroll Saw]]
== Documentation ==
== Documentation ==
[[Media:5da1c223-3df7-4236-8b34-34eb1641764a.pdf|Scroll Saw User Manual]]
====Terminology====
====Terminology====
The cutting angle of the scroll saw can be changed by doing the following:
The cutting angle of the scroll saw can be changed by doing the following:
1. Release the locking lever by rotating it counter-clockwise.
2. Turn the tilting handle left or right as desired.
2. Turn the tilting handle left or right as desired.
1. Obtain a piece of wood roughly 4" x 4". If the work piece is too small it will be difficult to hold onto.
1. Obtain a piece of wood roughly 4" x 4". If the work piece is too small it will be difficult to hold onto.
2. Using a pencil or pen sketch a letter without a isolated center.
2. Using a pencil or pen sketch a letter without a isolated center.
3. Make sure to tension the blade by flipping the blade tension lever. If the blade is not tensioned properly the blade cut will tend to drift and will make it difficult to follow the cut lines.
4. Adjust the height of the hold down and blade guard for the thickness of material you are using.
5. Make sure to tension the blade by flipping the blade tension lever. If the blade is not tensioned properly the blade cut will tend to drift and will make it difficult to follow the cut lines.
5. Make sure the air blow-off nozzle is pointing at location in front of the blade. This will remove dust from the cut lines and make it easier to follow your lines.
6. Make sure the material is clear of the blade and turn on the power switch.
6. Make sure the material is clear of the blade and turn on the power switch.
==Certification==
==Certification==
[https://foxtale.georgefox.edu/moodle/course/view.php?id=30802 Foxtale Course]
[https://georgefox.instructure.com/courses/1197 Canvas Quiz]
==Troubleshooting==
==Troubleshooting==
If the blade pulls out of the holder, stop the machine and contact the supervisor. Over tightening the blade holder will damage the threads.
==Maintenance==
==Maintenance==