1,947
edits
Changes
Jump to navigation
Jump to search
Line 83:
Line 83: − + − + − +
→General maintenance
There are several items on the machine that will need attention over time.
There are several items on the machine that will need attention over time.
* Every 10-15 hours of use the blade tension lever should be lubricated.
* Every 10-15 hours of use, the blade tension lever should be lubricated.
* The blade may need to be squared up to the table.
* The blade may need to be squared up to the table if it gets out of adjustment.
* The upper arm adjustment screw may need to be adjusted if the upper arm will not stay in the upright position.
* The upper arm adjustment screw will need to be adjusted if the upper arm will not stay in the upright position.
* If the blade slips in the holder frequently it is time to change the blade clamp thumb screw.
* If the blade slips in the holder frequently it is time to change the blade clamp thumb screw.