Rotary Punch

From maker-hub
Jump to navigation Jump to search
Rotary Punch icon
Rotary Punch

Make: Di-Acro

Model: Turret Punch No. 12

Serial Number: BD-1291

Ace: Needed (Makerhub@georgefox.edu).

Location: Machine Shop

Description

A rotary punch, also known as a turret punch. The punch in the shop is a "C Frame" style punch and is used to shear holes in materials. The turret would normally contain a variety of punches of different shapes and sizes. The selected punch and die required needs to be properly aligned before use. You can use the laser to cut any shapes needed as the rotary punch is not currently setup with any dies.

Here is an example of this piece of equipment being used.

  • Insert Video

Documentation

Terminology

  • Punch-
  • Die-
  • Turret-

User Manual Media:Rotary_Punch_Manual.pdf

Training

Operation

Insert Text

Demonstration

Insert text

General Procedure

Insert text

Safety

  1. Make sure to keep your hands and fingers away from all pinch points.

Certification

Foxtale Quiz

Troubleshooting

Maintenance

General maintenance

There are several grease fittings located on the machine that need to be greased. The punches also need to be oiled as needed by the technician.

Specific Maintenance Tasks

Maintenance Procedure Frequency Done By
Sample Sample Sample