Changes

Jump to navigation Jump to search
Line 1: Line 1:  
The prototype lab contains a group of 3D printers and a laser cutter (more to come in the near future)!  
 
The prototype lab contains a group of 3D printers and a laser cutter (more to come in the near future)!  
   −
The Aces of the Prototype Lab are: Ben Kraske and Gabi Lorenzo.   
+
The Aces of the Prototype Lab are: Ben Kraske (bkraske16@georgefox.edu) and Gabi Lorenzo (glorenzo16@georgefox.edu).   
    
==General 3D Printing Knowledge==
 
==General 3D Printing Knowledge==
==General Laser Cutting Knowlege==
+
3D printing is the process of joining material together to create a three-dimensional opject using computer control. It is a form of additive manufacturing. Objects are created using a 3D model. There are many different types of 3D printing, and the Prototype Lab utilizes two types which are FDM (fused deposit modeling) and SLA (stereolithography).
 +
 
 +
In the Prototype Lab, objects are most commonly printed from an STL file. This means if you create a part in Solidworks that you must save the file as a STL instead of a SLDPRT. Once the file is in STL form, it can then be processed by a slicer software. The slicer software converts the 3D model into thin layers and produces a G-code file. G-codes communicate with the chosen 3D printer, giving it directions on how to print the object.
 +
 
 +
Different 3D printers will run with different slicer programs. Typically a program will allow you to edit various parts of the process. One common consideration will be that of the layer thickness. This is the resolution at which the printer will print at. Each printer will have its own range of resolution. The thinner the layer thickness (higher resolution), the more detail you will get, but the print will be created more slowly. The thicker the layers (lower resolution), the less detail you will receive, but the object will be printed more quickly. Another consideration is support. For objects with overhangs, holes, etc., support will be needed. This will give the printer a surface to print on so that it can continue to build the print layer by layer.
 +
 
 +
==General Laser Cutting Knowledge==
    
=Equipment Overview=
 
=Equipment Overview=
142

edits

Navigation menu