1,341
edits
Changes
Jump to navigation
Jump to search
Line 124:
Line 124: − + + Line 132:
Line 133: − + + +
→Level 1
## Click "Start." Let the Voltera finish its process. If a portion of the print fails or is incorrect, you can stop mid-print, or wait until it is finished and redo that selection. Also shown below is an example of a portion of ink that globbed up. The portion was wiped and can be reprinted. [[File:voltera_printing.jpg|300x300px|none]] <br /> [[File:voltera_print_blob.jpg|300x300px|none]] <br /> [[File:voltera_print_redo.jpg|300x300px|none]] <br />
## Click "Start." Let the Voltera finish its process. If a portion of the print fails or is incorrect, you can stop mid-print, or wait until it is finished and redo that selection. Also shown below is an example of a portion of ink that globbed up. The portion was wiped and can be reprinted. [[File:voltera_printing.jpg|300x300px|none]] <br /> [[File:voltera_print_blob.jpg|300x300px|none]] <br /> [[File:voltera_print_redo.jpg|300x300px|none]] <br />
## Remove the conductor, replace the cap, '''and return the conductive ink to the fridge!'''
## Remove the conductor, replace the cap, '''and return the conductive ink to the fridge!'''
## When you reach the "Flip Board," you are done. Quit the Voltera application. <br /> <br />
## When you reach the "Flip Board," you are done. Quit the Voltera application.
## Unclamp the board from the Voltera. Remember that the traces are still wet.<br /> <br />
# ''Baking the Traces''
# ''Baking the Traces''
## Switch over to the Reflow Oven. [[File:bake_go_2.jpg|300x300px|none]] <br />
## Switch over to the Reflow Oven. [[File:bake_go_2.jpg|300x300px|none]] <br />
## '''DANGER: The rails could be HOT! Take caution.''' Place the board securely on the rails. [[File:bake_place.jpg|300x300px|none]] <br />
## '''DANGER: The rails could be HOT! Take caution.''' Place the board securely on the rails. [[File:bake_place.jpg|300x300px|none]] <br />
## Press "Enter" to close the tray. [[File:bake_go.jpg|300x300px|none]] <br />
## Press "Enter" to close the tray. [[File:bake_go.jpg|300x300px|none]] <br />
## The preheat will take 2 minutes. The baking process takes about 30 min. [[File:bake_inside.jpg|300x300px|none]] talk about taking it out of the oven
## The preheat will take 2 minutes. The baking process takes about 30 min.
## '''The drawer will automatically open to initiate the cool down phase. DO NOT remove the board until the oven says all the stages are complete. DANGER: The rails are HOT!'''
## When cool down is complete, remove the board from the oven. [[File:bake_inside.jpg|300x300px|none]]
#''Preparing for Solder Paste''
#''Preparing for Solder Paste''
##Take a barnishing pad from one of the drawers.
##Take a barnishing pad from one of the drawers.