1,341
edits
Changes
Jump to navigation
Jump to search
Line 121:
Line 121: − + − + − + − + − + − + − + − + + +
→Level 1
## Click "Next." <br /><br />
## Click "Next." <br /><br />
# ''Top Layer Print''
# ''Top Layer Print''
## The Voltera will print what is green. Ensure the portion you want to print is selected. Blue lines will not be printed. [[File:voltera_selection.PNG|300x300px|none]] <br />
## The Voltera will print what is selected in green. Below is an example of a portion of the board selection. Ensure the portion you want to print is selected (in this case, select everything.) Remember that blue lines will not be printed. [[File:voltera_selection.PNG|300x300px|none]] <br />
## Click "Start." Let the Voltera finish its process. If a portion of the print fails or is incorrect, you can stop mid-print, or wait until it is finished and redo that selection. Also shown below is an example of a portion of ink that globbed up. The portion was wiped and can be reprinted [[File:voltera_printing.jpg|300x300px|none]] <br /> [[File:voltera_print_blob.jpg|300x300px|none]] <br /> [[File:voltera_print_redo.jpg|300x300px|none]] <br />
## Click "Start." Let the Voltera finish its process. If a portion of the print fails or is incorrect, you can stop mid-print, or wait until it is finished and redo that selection. Also shown below is an example of a portion of ink that globbed up. The portion was wiped and can be reprinted [[File:voltera_printing.jpg|300x300px|none]] <br /> [[File:voltera_print_blob.jpg|300x300px|none]] <br /> [[File:voltera_print_redo.jpg|300x300px|none]] <br />
## Remove the conductor, replace the cap, AND PUT IT IN THE FRIDGE.
## Remove the conductor, replace the cap, '''and return the conductive ink to the fridge!'''
## When you reach the "Flip Board," you are done. Quit the Voltera app
## When you reach the "Flip Board," you are done. Quit the Voltera application.
## Power on.
# Baking the Traces
## Select V1 INK
## Switch over to the Reflow Oven.
## The reflow will warm up. When its ready, press enter to open the tray
## Power the Reflow Oven on.
## Place the board securely on the rails.
## Select "V1 INK."
## Press enter to close the tray. The preheat will take 2 minutres This reflow takes about 30 min. [[File:voltera_nick.jpg|300x300px|thumb|right|Wow]]
## The oven will warm up. When its ready, press "Enter" to open the tray.
## '''DANGER: The rails could be HOT! Take caution.''' Place the board securely on the rails.
## Press enter to close the tray. The preheat will take 2 minutes. The baking process takes about 30 min. [[File:voltera_nick.jpg|300x300px|thumb|right|Wow]]
=== Level 2 ===
=== Level 2 ===