Changes

# ''Top Layer Print''

# ''Top Layer Print''

## The Voltera will print what is green. Ensure the portion you want to print is selected. Blue lines will not be printed. (Insert pic that i snipped)

## The Voltera will print what is green. Ensure the portion you want to print is selected. Blue lines will not be printed. (Insert pic that i snipped)

## Click "Start." [[File:voltera_laying_ink.jpg|300x300px|thumb|right|Step]]

## Click "Start." Let the Voltera finish its process. If a portion of the print fails or is incorrect, you can stop mid-print, or wait until it is finished and redo that selection. Fig 3 is an example of a portion of ink that globbed up. The portion was wiped and can be reprinted [[File:voltera_laying_ink.jpg|300x300px|thumb|right|Step]]

## If a portion of the print fails or is incorrect, you can stop mid-print, or wait until it is finished and redo that selection. Fig 3 is an example of a portion of ink that globbed up. The portion was wiped and can be reprinted

## Remove the conductor, replace the cap, AND PUT IT IN THE FRIDGE.

## Remove the conductor, replace the cap, AND PUT IT IN THE FRIDGE.

## When you reach the "Flip Board," you are done. Quit the voltera app

## When you reach the "Flip Board," you are done. Quit the voltera app