1,947
edits
Changes
Jump to navigation
Jump to search
Line 69:
Line 69: − + − + − + − + − + − * No hats or open toed shoes.+ − − * Hair will not extend bellow the collar. − − * Do not wear gloves while operating machinery. − − * Food or drink is allowed when not operating machinery and it is kept a safe distance away from the machines. − − − + − − * Reset the space. Make the area you are working in ready for the next person using the dust broom and vacuum cleaner. − +
→1. Safety First
Safety First is the rule we hold highest of the three. This rule applies to both the safety of you as well as others
Safety First is the rule we hold highest of the three. This rule applies to both the safety of you as well as others
Keeping yourself safe in the Wood Shop is very important, as there are possibilities for accidents if you don't follow the safety guidelines. Safety starts with you so don't depend on others to keep you safe. There is a first aid kit located on the south wall near the Wood Shop door.<br> The following rules must be followed at all times.
Keeping yourself and others safe in the PCB Lab is very important, as there are possibilities for accidents if you don't follow the safety guidelines. Safety starts with you so don't depend on others to keep you safe. There is a first aid kit located on the south wall near the Wood Shop door.<br> The following rules must be followed at all times.
All the same safety rules from the machine shop apply:
All the same safety rules from the machine shop apply:
* Safety glasses must be worn when crossing into the shop area marked on the floor.
* Safety glasses must be worn when soldering or running Volter printers.
* No horseplay in the shop.
* No horseplay in the PCB Lab.
* Don’t do anything distracting to yourself or others while operating machinery.
* Don’t do anything distracting to yourself or others while operating equipment.
* Do not wear any loose clothing, jewelry, or landyards.
* Food or drink is allowed when not operating equipment. Wash your hands after soldering or working with solder paste and chemicals.
* Do not attempt to operate machinery in the PCB Lab that you have not been certified on.
* Do not attempt to operate machinery in the shop that you have not been certified on by GFU engineering personnel.
* Do not argue with volunteers or shop staff. Contact Justin Johnson if you have issues that need to be resolved.
* Do not argue with volunteers or shop staff. Contact Justin Johnson if you have issues that need to be resolved.
* Do not operate machinery without a shop supervisor or trained volunteer in the shop with you. Never operate equipment alone in the shop.
* Do not operate equipment without a lab supervisor or trained volunteer in the lab with you.
* The first aid kit is located in the machine shop, next to the wood shop doors.
* Reset the space. Make the area you are working in ready for the next person.
* If you see a safety violation inform the person immediately and encourage them to comply with the policies
* If you see a safety violation inform the person immediately and encourage them to comply with the policies