2,297
edits
Changes
Jump to navigation
Jump to search
Line 132:
Line 132: + + Line 143:
Line 145: − + − + − + − + − + − +
→General Procedure
Second, punch your stitching holes using a stitching chisel. Use the rawhide hammer to pound the stitching chisel with a scrap wood block underneath to avoid damaging the table. The main trick to this technique is to make sure that your chisel is perfectly perpendicular to the leather. A slight angle one way or the other will make it so the stitching on the backside doesn’t line up. This is especially a problem on thicker projects, like belts.
Second, punch your stitching holes using a stitching chisel. Use the rawhide hammer to pound the stitching chisel with a scrap wood block underneath to avoid damaging the table. The main trick to this technique is to make sure that your chisel is perfectly perpendicular to the leather. A slight angle one way or the other will make it so the stitching on the backside doesn’t line up. This is especially a problem on thicker projects, like belts.
How much thread do I need? This depends greatly on the thickness of the leather and the style of stitch. For saddle stitching, it's recommended to cut thread that is between 4-lengths (for thinner projects) and 8-lengths (for thicker projects) of the total stitching length on the piece of leather. How tight you pull the thread will also make a big difference in how much thread is needed. No need to pull with all your might, but definitely don't leave your stitches loose.
Now to the hard part: saddle stitching. Once you have the needles through the first hole, take the needle on the left side and push it through the leather. Then, with the right needle, come behind the left needle to make a cross. Next, with the right needle still behind the left needle, pull the left needle through and rotate your hand toward you so that the left needle is now facing you and the right needle is facing the stitching holes.
Now to the hard part: saddle stitching. Once you have the needles through the first hole, take the needle on the left side and push it through the leather. Then, with the right needle, come behind the left needle to make a cross. Next, with the right needle still behind the left needle, pull the left needle through and rotate your hand toward you so that the left needle is now facing you and the right needle is facing the stitching holes.
<gallery>
<gallery>
File:Thread1.jpg
File:Thread1.jpg|Cut the thread to the needed length
File:Thread2.jpg
File:Thread2.jpg|Roll or flatten the tip of the thread to put it through the eye of the needle
File:Thread3.jpg
File:Thread3.jpg|With the thread extending 1-2" beyond the tip of the needle, pierce the center of the thread with the needle
File:Thread4.jpg
File:Thread4.jpg|Pull the pierced section of thread beyond the eye of the needle to create a knot
File:Thread5.jpg
File:Thread5.jpg|Pull from both sides of the thread to tighten the knot
File:Thread6.jpg
File:Thread6.jpg|Slide the knot to the top of the eye, and now you are ready to stitch
</gallery>
</gallery>