Changes

* Don't exceed a 1/16" cut per pass as too heavy of a cut can try to push material back at you and overload the machine.  

* Don't exceed a 1/16" cut per pass as too heavy of a cut can try to push material back at you and overload the machine.  

* Make sure material cut is free of all metal and loose Knots to prevent damage to you and the machine.   

* Make sure material cut is free of all metal and loose Knots to prevent damage to you and the machine.   

* Never apply pressure to the material directly over the cutter head. This could cause the board to tip and or put your hand/fingers at risk.  

* Never apply downward pressure to the material directly over the cutter head. This could cause the board to tip and or put your hand/fingers at risk.  

This is a video showing how to safely use the jointer:  

This is a video showing how to safely use the jointer:  

{{#evu:https://www.youtube.com/watch?v=3d1qBxcnI0E

{{#evu:https://www.youtube.com/watch?v=3d1qBxcnI0E