2,297
edits
Changes
Jump to navigation
Jump to search
Line 63:
Line 63: − +
→General Procedure
Edge Cleanup
Edge Cleanup
1. Ensure that the material you are cutting is free from nails or foreign objects. Foreign material will damage the cutters and create flying hazards.
1. Ensure that the material you are cutting is free from nails, foreign objects, significant knots. Foreign material will damage the cutters and create flying hazards.
2. Make sure the board is at least 10" long and at least 3/8" wide to prevent the board from tilting while cutting. Do not joint workpieces less than 1/4" thick.
2. Make sure the board is at least 10" long and at least 3/8" wide to prevent the board from tilting while cutting. Do not joint workpieces less than 1/4" thick.