1,947
edits
Changes
Jump to navigation
Jump to search
Line 84:
Line 84: − +
→General Procedure
1. Ensure that the material you are cutting is free from nails or foreign objects. Foreign material will damage the cutters and create flying hazards.
1. Ensure that the material you are cutting is free from nails or foreign objects. Foreign material will damage the cutters and create flying hazards.
2. Make sure the board is at least xxx" long and xxx" wide to prevent the board from tilting while cutting.
2. Make sure the board is at least 10" long and 1" wide to prevent the board from tilting while cutting.
3. Check the cut gauge. When facing you normally want to take off a small amount of material per pass due to the large surface area.
3. Check the cut gauge. When facing you normally want to take off a small amount of material per pass due to the large surface area.