1,947
edits
Changes
Jump to navigation
Jump to search
Line 65:
Line 65: − PRESSING IN THE PIN+ Line 98:
Line 98: + +
→General Procedure
[[File:Baileigh_Hydraulic_Press.jpg|none|thumb|600x600px]]
[[File:Baileigh_Hydraulic_Press.jpg|none|thumb|600x600px]]
'''Pin Insertion'''
1. Place the plate you will be pressing the pin into on the top of the table.
1. Place the plate you will be pressing the pin into on the top of the table.
16. When the pin is at the bottom of its travel it will stop moving and you will see the force increase on the gauge and this is a good time to stop cycling the handle.
16. When the pin is at the bottom of its travel it will stop moving and you will see the force increase on the gauge and this is a good time to stop cycling the handle.
'''Pin Removal'''
==Safety==
==Safety==