1,947
edits
Changes
Jump to navigation
Jump to search
Line 160:
Line 160: − + − − 16. When the pin is flush it will stop moving and you will see the force increase on the gauge and this is a good time to stop cycling the handle. − − 17. At this point you will need another piece of material slightly smaller than the pin to assist in the final removal of the pin. − − 18. Using the guide will help keep the material straight while pushing on the dowel pin.
→General Procedure
[[File:HP Step 8.jpg|none|thumb]]
[[File:HP Step 8.jpg|none|thumb]]
15. You will continue to press the pin until the pin is flush with the top of the material.
15. You will continue to press the pin using the extraction tool equipped with the smaller pin.
19. As the dowel pin approaches the bottom of plate get ready to catch it to prevent it from falling on the floor.
19. As the dowel pin approaches the bottom of plate get ready to catch it to prevent it from falling on the floor.