Changes

*'''Pressure Gauge'''- An indicator that uses a needle to indicate the amount of force being applied to the work piece.  

*'''Pressure Gauge'''- An indicator that uses a needle to indicate the amount of force being applied to the work piece.  

*Release Valve Handle- This is the control handle for releasing the hydraulic pressure in the system. Turn the handle clockwise prior to charging the hydraulic system and counter-clockwise when releasing pressure.

*'''Release Valve Handle'''- This is the control handle for releasing the hydraulic pressure in the system. Turn the handle clockwise prior to charging the hydraulic system and counter-clockwise when releasing pressure.

*Table Holding Pin- 4 removable pins support the table and allow for height adjustment.   

*'''Table Holding Pin'''- 4 removable pins support the table and allow for height adjustment.   

*Ram- This is is the end of the hydraulic cylinder rod that moves and pushes against your work piece.  

*'''Ram'''- This is is the end of the hydraulic cylinder rod that moves and pushes against your work piece.  

*Pump Handle Socket- This is the location for handle placement while pumping up the hydraulic system.

*'''Pump Handle Socket'''- This is the location for handle placement while pumping up the hydraulic system.

==Training==

==Training==