Difference between revisions of "Hydraulic Press"

From maker-hub
Jump to navigation Jump to search
Line 88: Line 88:
  
 
== Resources ==
 
== Resources ==
 
 
== Training ==
 

Revision as of 15:37, 14 April 2020

Hydraulic Press icon
Baileigh 30 Ton Hydraulic/Air Press

Make: Baileigh

Model: 30T Air Press

Ace: Nathan Hayward (nhayward21@georgefox.edu).

Location: Machine Shop



Description

A hydraulic press is a machine tool that uses a hydraulic cylinder to generate a compressive force. They are often used in shops to press interference fit parts together, such as gears onto shafts or bearings into housings. Some of the other uses include bending and forming metal. Some presses use a manual pump to produce the force while others use compressed air or a power unit driven by an electric motor.

Here is an example of this piece of equipment being used.

Documentation

Terminology

Insert terminology here

User Manual

Training

Overview

Insert Text

Demonstration

Insert text

General Procedure

Baileigh Hydraulic Press.jpg

Safety

When operating a hydraulic press be aware that extremely dangerous forces are produced which can cause parts to shatter and fly like bullets. It's very important to keep an eye on the force gauge while increasing force and to be aware of the dangers of flying parts. Always keep you hands away from the ram and parts being pressed. Keep stacked parts as short as possible to prevent tilting or buckling. If you have questions make sure to ask a supervisor prior to attempting something that could be potentially dangerous. Be aware that you may be working with heavy material located several feet above the floor and there is potential to drop metal on your feet.

Certification

Foxtale Quiz

Troubleshooting

If you pump the handle and the ram doesn't move try tightening the release valve knob.

Maintenance

General maintenance

Insert text

Specific Maintenance Tasks

Maintenance Procedure Frequency Done By
Sample Sample Sample


Resources