Changes

10) Since the forming nose is applying a force to the nice p you had, it will be slightly deformed. To Fix this, simply put the deformed side around the radius pin and re-bend it until you are satisfied with the shape.   

10) Since the forming nose is applying a force to the nice p you had, it will be slightly deformed. To Fix this, simply put the deformed side around the radius pin and re-bend it until you are satisfied with the shape.   

11) Reset the space.    

11) Reset the space.          

<nowiki>*</nowiki>If the rod slips loose during the bending process try tightening the locking pin and adjusting the location slightly. If the issue persists try clamping the center of the rod between the radius and locking pins and bending about this point.   

<nowiki>*</nowiki>   If the rod slips loose during the bending process try tightening the locking pin and adjusting the location slightly. If the issue persists try clamping the center of the rod between the radius and locking pins and bending about this point.   

==Safety==

==Safety==

*Keep all hands and fingers out of any pinch points.

*Keep all hands and fingers out of any pinch points.