1,947
edits
Changes
Jump to navigation
Jump to search
Line 107:
Line 107: − ==General Bead Blasting Knowledge==+ − Bead blasting is the process of using compressed air to propel small glass beads for ablating and cleaning a material surface. Different types of blast media are used in industry including Soda, Walnut shells, Sand and many more material types. − <br>These are a few good steps to having a Success with glass beading. − * Make sure the material is free from heavy grease and dirt. − * The material needs to physically fit into the blast cabinet. − Here are a couple things to keep in mind: − * Never point the nozzle at the gloves or window. − * Make sure the power switch is turned on before use. − * Always wait 5 minutes after use before opening the cabinet door. − * Never try to bead blast anything flammable. Blasting can sometimes create sparks. − *Never activate the foot pedal with the cabinet door open.
→General Bead Blasting Knowledge
FDM printers can work with various materials, in the Prototype Lab we mainly stick to ABS which is used by the Stratasys machines and PLA which is used by the Prusas. The Markforge uses a material called Onyx (nylon and plastic mix) and will layer in another filament such as Carbon Fiber, Kevlar, etc.
FDM printers can work with various materials, in the Prototype Lab we mainly stick to ABS which is used by the Stratasys machines and PLA which is used by the Prusas. The Markforge uses a material called Onyx (nylon and plastic mix) and will layer in another filament such as Carbon Fiber, Kevlar, etc.