Changes

  |Is equipment=True

  |Is equipment=True

  |Is sheet metal equipment=True

  |Is sheet metal equipment=True

  |Has make=Chicago

  |Has make=Chicago Steel

  |Has model=W31

  |Has model=W31

  |Is located in facility= Machine Shop

  |Is located in facility= Machine Shop

  |Is used in domain=Metal

  |Is used in domain=Metal

  |Has name={{PAGENAME}}

  |Has name={{PAGENAME}}  

  |Has function=Steel Bending Brake

  |Has function=Steel Bending Brake

  |Has url=http://www.tennsmith.com/foot-squaring-shears.html

  |Has url=http://www.tennsmith.com/foot-squaring-shears.html

  |Has icon=File:Bending_brakeIcon.png

  |Has icon=File:Bending_brakeIcon.png

  |Has icondesc=

  |Has icondesc=

  |Has image=File: 48_Inch_Bending_Brake.jpg

  |Has image=File: 48_Inch_Bending_Brake.jpg

  |Has imagedesc=48 inch bending brake, 14 gauge

  |Has imagedesc=48 inch bending brake, 14 gauge

  |Has description=48 inch bending brake, 14 gauge

  |Has description=48 inch bending brake, 14 gauge

  |Has ace=Noah Bloomquist;nbloomquist17@georgefox.edu

  |Has ace=Nathan Hayward;nhayward21@georgefox.edu

}}  

}}  

[[{{#show: {{FULLPAGENAME}}|?Has icon|link=none}}|100px|left|top|{{#show: {{FULLPAGENAME}}|?Has icondesc}}]]

[[{{#show: {{FULLPAGENAME}}|?Has icon|link=none}}|140px|left|top|{{#show: {{FULLPAGENAME}}|?Has icondesc}}]]

[[{{#show: {{FULLPAGENAME}}|?Has image|link=none}}|300px|thumb|upright=1.5|{{#show: {{FULLPAGENAME}}|?Has imagedesc}}]]

[[{{#show: {{FULLPAGENAME}}|?Has image|link=none}}|300px|thumb|upright=1.5|{{#show: {{FULLPAGENAME}}|?Has imagedesc}}]]

Make: {{#show: {{PAGENAME}} |?Has make}}

Make: {{#show: {{PAGENAME}} |?Has make}}

Model: {{#show: {{PAGENAME}} |?Has model}}

Model: {{#show: {{PAGENAME}} |?Has model}}

Ace: {{#show: {{PAGENAME}} |?Has ace.Has name}} ({{#show: {{PAGENAME}} |?Has ace.Has email address}}).

Ace: {{#show: {{PAGENAME}} |?Has ace.Has name}} ({{#show: {{PAGENAME}} |?Has ace.Has email address}}).

==Description==

==Description==

A bending brake is a metalworking machine that allows the bending of sheet metal. The brake in the shop is a Chicago W31 steel box and pan brake. In a box-and-pan brake (also known as a finger brake), the clamping bar includes several removable blocks, which may be removed and rearranged to permit bending of restricted areas of a piece of sheet metal or of already partially formed pieces. After bending, a box or pan form is then completed by screw, solder, weld, rivet, or other metal fixing process.

A bending brake is a metalworking machine that allows the bending of sheet metal. The brake is a Chicago W31 steel box and pan brake. The max material thickness capacity of this machine is 16 gauge mild steel.  In a box-and-pan brake (also known as a finger brake), the clamping bar includes several removable blocks, which may be removed and rearranged to permit bending of restricted areas of a piece of sheet metal or of already partially formed pieces. After bending, a box or pan form is then completed by screw, solder, weld, rivet, or other metal fixing process.

Here is an example of this piece of equipment being used.

Here is an example of this piece of equipment being used.

==Documentation==

==Documentation==

====Terminology====

====Terminology====

====Parts of the Machine====

====Parts of the Machine====

[[File:Bending Brake Parts 1.jpg|600px|thumb|Clamping Handle and Fingers|none]]

[[File:Bending Brake Parts 1.jpg|600px|thumb|Clamping Handle and Fingers|none]]

[[File:Bending Brake Parts 2.jpg|600px|thumb|Bending Handle and Counterweight|none]]

[[File:Bending Brake Parts 2.jpg|600px|thumb|Bending Handle and Counterweight|none]]

==Training==

==Training==

====Overview====

====Operation====

Insert Text

Insert Text

====Demonstration====

====Demonstration====

====General Procedure====

====General Procedure====

=== Bending Steps ===

=== Bending Steps ===

#Ensure that your sheet metal is thinner or equivalent to 14-gauge sheet metal, and ensure that it is less than 48" in width.

#Ensure that your sheet metal is thinner or equivalent to 16-gauge sheet metal, and ensure that it is less than 48" in width.

#If making a bend for a box or a pan, adjust the fingers so that the equivalent width of the fingers is just shorter than your sheet metal.

#If making a bend for a box or a pan, adjust the fingers so that the equivalent width of the fingers is just shorter than your sheet metal.

#Adjust the clamping force and the clamping handle to allow room to insert your work piece.

#Adjust the clamping force and the clamping handle to allow room to insert your work piece.

#Insert your work piece to the line you want to bend, centered in the brake, and clamp your piece securely.

#Insert your work piece to the line you want to bend, centered in the brake, and clamp your piece securely.

#Pull up on the bending handle of the leaf slowly until your piece is bent to the desired angle, and slowly lower the leaf.

#Pull up on the bending handle of the leaf slowly until your piece is bent to the desired angle, and slowly lower the leaf.

#If the piece does not bend straight, unclamp the handle on the overbent side and adjust the top leaf.

#If the piece does not bend straight, unclamp the handle on the over-bent side and adjust the top leaf.

#Adjust the clamp handle, and remove your piece.

#Adjust the clamp handle, and remove your piece.

#Put back any fingers if adjusted, and deburr if any rough edges are left.

#Put back any fingers if adjusted, and deburr if any rough edges are left.

=== Reset the Space ===

=== Reset the Space ===

==Certification==

==Certification==

[https://foxtale.georgefox.edu/moodle/course/view.php?id=31415 Foxtale Quiz]

[https://georgefox.instructure.com/courses/1310 Canvas Quiz]

==Troubleshooting==

==Troubleshooting==

====General maintenance====

====General maintenance====

====Specific Maintenance Tasks====

====Specific Maintenance Tasks====

!Done By

!Done By

|-

|-

|Sample

|Oil Surfaces

|Sample

|As Needed

|Sample

|Technician

|}

|}