124
edits
Changes
Jump to navigation
Jump to search
Line 2:
Line 2: − + + − + + − + − + − − + + + + + + + + + + + + Line 39:
Line 51: − *Manual [[Media:Chicago-hand-operated-bending-brakes-brochure.pdf]]+ − Insert Terminology Here+ + Line 49:
Line 62: − + Line 55:
Line 68: − Insert text+ − + − + − + − === Safety First ===+ − #Always make sure your hands are out of the way of the fingers and all moving parts. + − #Be aware of your surroundings to ensure that you do not bump others with the counterweight. + − #If bending a small piece of metal, place it in the center of the brake.+ − #Do not attempt to bend material thicker than 16 gauge.+ − #Only use sheet metal with the brake. Don't try to bend round material!+ − #You may not use the sheet metal machines without safety glasses!! (Should be obvious if you are following the rules of the shop)+ − === Reset the Space === − + Line 89:
Line 101: − Insert text+ Line 97:
Line 109: − + − + − +
no edit summary
|Is equipment=True
|Is equipment=True
|Is sheet metal equipment=True
|Is sheet metal equipment=True
|Has make=Chicago
|Has make=Chicago Steel
|Has model=W31
|Has model=W31
|Has serial number= 91016
|Is located in facility= Machine Shop
|Is located in facility= Machine Shop
|Is used in domain=Metal
|Is used in domain=Metal
|Has name={{PAGENAME}}
|Has name={{PAGENAME}}
|Has function=Steel Bending Brake
|Has function=Steel Bending Brake
|Has url=http://www.tennsmith.com/foot-squaring-shears.html
|Has url=http://www.tennsmith.com/foot-squaring-shears.html
|Has icon=File:Bending_brakeIcon.png
|Has icon=File:Bending_brakeIcon.png
|Has icondesc=
|Has icondesc=
|Has certification=https://georgefox.instructure.com/courses/1310
|Has image=File: 48_Inch_Bending_Brake.jpg
|Has image=File: 48_Inch_Bending_Brake.jpg
|Has imagedesc=48 inch bending brake, 14 gauge
|Has imagedesc=48 inch bending brake, 14 gauge
|Has description=48 inch bending brake, 14 gauge
|Has description=48 inch bending brake, 14 gauge
|Has ace=Noah Bloomquist;nbloomquist17@georgefox.edu
|Has ace=Nathan Hayward;nhayward21@georgefox.edu
}}
}}
[[{{#show: {{FULLPAGENAME}}|?Has icon|link=none}}|100px|left|top|{{#show: {{FULLPAGENAME}}|?Has icondesc}}]]
[[{{#show: {{FULLPAGENAME}}|?Has icon|link=none}}|140px|left|top|{{#show: {{FULLPAGENAME}}|?Has icondesc}}]]
[[{{#show: {{FULLPAGENAME}}|?Has image|link=none}}|300px|thumb|upright=1.5|{{#show: {{FULLPAGENAME}}|?Has imagedesc}}]]
[[{{#show: {{FULLPAGENAME}}|?Has image|link=none}}|300px|thumb|upright=1.5|{{#show: {{FULLPAGENAME}}|?Has imagedesc}}]]
Make: {{#show: {{PAGENAME}} |?Has make}}
Make: {{#show: {{PAGENAME}} |?Has make}}
Model: {{#show: {{PAGENAME}} |?Has model}}
Model: {{#show: {{PAGENAME}} |?Has model}}
Serial Number: {{#show: {{PAGENAME}} |?Has serial number}}
Ace: {{#show: {{PAGENAME}} |?Has ace.Has name}} ({{#show: {{PAGENAME}} |?Has ace.Has email address}}).
Ace: {{#show: {{PAGENAME}} |?Has ace.Has name}} ({{#show: {{PAGENAME}} |?Has ace.Has email address}}).
Location: {{#show: {{PAGENAME}} |?Is located in facility}}
Location: {{#show: {{PAGENAME}} |?Is located in facility}}
==Safety First==
[[File:Safety First HD2.png|left|150px]]
Here are some safety instructions for the {{PAGENAME}}. Remember... SAFETY FIRST!!!
* Always make sure your hands are out of the way of the fingers and all moving parts
* Be aware of your surroundings to ensure that you do not bump others with the counterweight.
* If bending a small piece of metal, place it in the center of the brake.
* Do not attempt to bend material thicker than 16 gauge.
* Only use sheet metal with the brake. Don't try to bend round material!
* You may not use the sheet metal machines without safety glasses!! (Should be obvious if you are following the rules of the shop)
==Description==
==Description==
==Documentation==
==Documentation==
[[Media:Chicago-hand-operated-bending-brakes-brochure.pdf|Bending Brake User Manual]]
====Terminology====
====Terminology====
*Bending Handle-
*Clamping Handle-
====Parts of the Machine====
====Parts of the Machine====
==Training==
==Training==
====Overview====
====Operation====
Insert Text
Insert Text
====Demonstration====
====Demonstration====
To demonstrate competency on the Bending brake you will be required to bend a piece of sheet metal to a 90 degree angle.
====General Procedure====
====General Procedure====
=== Bending Steps ===
=== Bending Steps ===
#Ensure that your sheet metal is thinner or equivalent to 14-gauge sheet metal, and ensure that it is less than 48" in width.
#Ensure that your sheet metal is thinner or equivalent to 16-gauge sheet metal, and ensure that it is less than 48" in width.
#If making a bend for a box or a pan, adjust the fingers so that the equivalent width of the fingers is just shorter than your sheet metal.
#If making a bend for a box or a pan, adjust the fingers so that the equivalent width of the fingers is just shorter than your sheet metal.
#Adjust the clamping force and the clamping handle to allow room to insert your work piece.
#Adjust the clamping force and the clamping handle to allow room to insert your work piece.
#Insert your work piece to the line you want to bend, centered in the brake, and clamp your piece securely.
#Insert your work piece to the line you want to bend, centered in the brake, and clamp your piece securely.
#Pull up on the bending handle of the leaf slowly until your piece is bent to the desired angle, and slowly lower the leaf.
#Pull up on the bending handle of the leaf slowly until your piece is bent to the desired angle, and slowly lower the leaf.
#If the piece does not bend straight, unclamp the handle on the overbent side and adjust the top leaf.
#If the piece does not bend straight, unclamp the handle on the over-bent side and adjust the top leaf.
#Adjust the clamp handle, and remove your piece.
#Adjust the clamp handle, and remove your piece.
#Put back any fingers if adjusted, and deburr if any rough edges are left.
#Put back any fingers if adjusted, and deburr if any rough edges are left.
==Safety==
==Reset the Space==
[[File:Reset The Space HD2.png|left|150px]]
Here is how you can reset the space for the {{PAGENAME}}. Remember to leave the space better than you found it!!!
* If you removed or adjusted any fingers, put them back where they belong.
* Reset all materials, scrap pieces go in the scrap bin.
* Ensure that the Brake and surrounding area are clean.
* Return any borrowed gloves or other equipment to their proper storage locations.
==Certification==
==Certification==
[https://foxtale.georgefox.edu/moodle/course/view.php?id=31415 Foxtale Quiz]
[https://georgefox.instructure.com/courses/1310 Canvas Quiz]
==Troubleshooting==
==Troubleshooting==
====General maintenance====
====General maintenance====
The machine needs to be cleaned and pivot points should be lubricated.
====Specific Maintenance Tasks====
====Specific Maintenance Tasks====
!Done By
!Done By
|-
|-
|Sample
|Oil Surfaces
|Sample
|As Needed
|Sample
|Technician
|}
|}