2,297
edits
Changes
Jump to navigation
Jump to search
Line 4:
Line 4: + + + + + + Line 10:
Line 16: − + − |Has make=PowerMatic+ − |Has model=BD31A − − + Line 21:
Line 25: + + + + + + + + + + + Line 38:
Line 53: − Insert terminology here+ − − − + Line 74:
Line 87: − − ==Safety== − * Sanding creates heat due to the friction. keep material moving to prevent damage to the sanding belt/disc. − * Never put your hand in a position that slipping could cause you to make contact with the belt or disc. − * Never reach over the machine while working or turning off the power. This can be very dangerous as you or your clothing could make contact with the spinning belt or disc. − * Use a brush when clearing sawdust from the tables, not your hands. − * Use light pressure when removing material. Never try to force feed the machine. − * Avoid kickbacks by sanding on the correct side of the disc. Always sand on the downward side of the disc, which is just left of center on a disc rotating counterclockwise. Sanding on the wrong side is dangerous and can pull material out of your hands. − +
no edit summary
|Is used in domain=Wood
|Is used in domain=Wood
|Has name={{PAGENAME}}
|Has name={{PAGENAME}}
|Has make=PowerMatic
|Has model=BD31A
|Has serial number=18100721
|Has life expectancy=
|Has year of manufacture or purchase=
|Has replacement cost=
|Has icon=File:Disc Belt Sander.png
|Has icon=File:Disc Belt Sander.png
|Has icondesc=
|Has icondesc=
|Has imagedesc=Belt and Disc Sander
|Has imagedesc=Belt and Disc Sander
|Has description=
|Has description=
|Has certification=
|Has certification=https://georgefox.instructure.com/courses/1200
|Has ace=Needed;Makerhub@georgefox.edu
|Has ace=Needed;Needed
}}
}}
[[{{#show: {{FULLPAGENAME}}|?Has icon|link=none}}|100px|left|top|{{#show: {{FULLPAGENAME}}|?Has icondesc}}]]
[[{{#show: {{FULLPAGENAME}}|?Has icon|link=none}}|140px|left|top|{{#show: {{FULLPAGENAME}}|?Has icondesc}}]]
[[{{#show: {{FULLPAGENAME}}|?Has image|link=none}}|300px|thumb|upright=1.5|{{#show: {{FULLPAGENAME}}|?Has imagedesc}}]]
[[{{#show: {{FULLPAGENAME}}|?Has image|link=none}}|300px|thumb|upright=1.5|{{#show: {{FULLPAGENAME}}|?Has imagedesc}}]]
Model: {{#show: {{PAGENAME}} |?Has model}}
Model: {{#show: {{PAGENAME}} |?Has model}}
Serial Number: {{#show: {{PAGENAME}} |?Has serial number}}
Ace: {{#show: {{PAGENAME}} |?Has ace.Has name}} ({{#show: {{PAGENAME}} |?Has ace.Has email address}}).
Ace: {{#show: {{PAGENAME}} |?Has ace.Has name}} ({{#show: {{PAGENAME}} |?Has ace.Has email address}}).
Location: {{#show: {{PAGENAME}} |?Is located in facility}}
Location: {{#show: {{PAGENAME}} |?Is located in facility}}
==Safety First==
[[File:Safety First HD2.png|left|150px]]
* Sanding creates heat due to the friction. keep material moving to prevent damage to the sanding belt/disc.
* Never put your hand in a position that slipping could cause you to make contact with the belt or disc.
* Never reach over the machine while working or turning off the power. This can be very dangerous as you or your clothing could make contact with the spinning belt or disc.
* Use a brush when clearing sawdust from the tables, not your hands.
* Use light pressure when removing material. Never try to force feed the machine.
* Avoid kickbacks by sanding on the correct side of the disc. Always sand on the downward side of the disc, which is just left of center on a disc rotating counterclockwise. Sanding on the wrong side is dangerous and can pull material out of your hands.
==Description==
==Description==
====Terminology====
====Terminology====
[[Media:0460267_man_EN.pdf|Belt/Disc Sander User Manual]]
[http://content.powermatic.com/assets/manuals/0460267_man_EN.pdf User Manual]
==Training==
==Training==
====Overview====
====Operation====
The disc sander allows you to sand outside corners and flat surfaces using an abrasive disc. The belt can perform inside corner and flat surface sanding. The table angles can be adjusted to change the angle of cuts. The sanding table can be set between 15 and 45 degrees. The belt arm can be adjusted between 0 and 90 degrees with the arm locking handle. It is important to inspect the sanding disc and belt for wear before use. If you notice any holes or cuts in a belt let the supervisor know before trying to power the machine. Tears can be caused by leaving material in the same spot too long. Try to keep work moving across the belt/disc to prevent damage. The disc normally won't tear but it will turn dark and have burn marks.
The disc sander allows you to sand outside corners and flat surfaces using an abrasive disc. The belt can perform inside corner and flat surface sanding. The table angles can be adjusted to change the angle of cuts. The sanding table can be set between 15 and 45 degrees. The belt arm can be adjusted between 0 and 90 degrees with the arm locking handle. It is important to inspect the sanding disc and belt for wear before use. If you notice any holes or cuts in a belt let the supervisor know before trying to power the machine. Tears can be caused by leaving material in the same spot too long. Try to keep work moving across the belt/disc to prevent damage. The disc normally won't tear but it will turn dark and have burn marks.
11. Reset the space.
11. Reset the space.
==Certification==
==Certification==
[https://foxtale.georgefox.edu/moodle/course/view.php?id=30803 Foxtale Course]
[https://georgefox.instructure.com/courses/1200 Canvas Quiz]
==Troubleshooting==
==Troubleshooting==