Hand Bender

Di-Acro Hand Bender

Make: Di-Acro

Model: Model 2 Bender (02HB)

Description

A hand bender is a machine used to bend wire, solid stock, and tubing. The bender comes with multiple dyes for different types of bends.
*Currently the bender stand is not bolted to the floor, so you can really only bend light materials like 1/8" thick aluminum. If you want to bend thicker material, you will need help from someone to hold the table. In the future we will be bolting the bender to a sturdier spot.

Here is an example of this piece of equipment being used.

https://www.youtube.com/watch?v=l2W9Mm2B7JM

Documentation

Terminology

Insert terminology here

Training

Overview

Read/skim the "Art of Bending" document to find out how to set up the equipment. Then Watch the "Simple Bend" video to see how the equipment functions.

Demonstration

Insert text

General Procedure

1) Cut a piece of .5"x.125" aluminum to a length of 6".

2) Set the bender to make a 90^o bend at 0.5" from the end of material;proceed to bend.

3) Make another 90^o bend at 1.5" from previous bend. Make bend in the same direction.

4) Set the bender to make a circular bend, of any size, 1.5" from previous bend. Bend in opposite direction as last bend.

Safety

Keep all hands and fingers out of any pinch points.
Be aware of your surroundings before swinging the bending handle.

Certification

Foxtale Quiz

Troubleshooting

This is a very basic piece of equipment so very little trouble shooting should be required. See the "Art of Bending" document for machine setup.

Maintenance

General maintenance

Tech will lubricate zerk fitting as needed.

Specific Maintenance Tasks

Maintenance Procedure	Frequency	Done By
Sample	Sample	Sample