Hand Bender
A hand bender is a machine used to bend wire, solid stock, and tubing. The bender comes with multiple dyes for different types of bends.
The current Ace of the Hand Bender is Needed (Makerhub@georgefox.edu).
*Currently the bender stand is not bolted to the floor, so you can really only bend light materials like 1/8" thick aluminum. If you want to bend thicker material, you will need help from someone to hold the table. In the future we will be bolting the bender to a sturdier spot.
3 commandments
Stuff about the 3 commandments.
Documentation
Resources
Training
Look at "Art of Bending" document to find out how to set up the equipment. Then Watch the "Simple Bend" video to see how the equipment functions.
Procedure
1) Cut a piece of .5"x.125" aluminum to a length of 6".
2) Set the bender to make a 90o bend at 0.5" from the end of material;proceed to bend.
3) Make another 90o bend at 1.5" from previous bend. Make bend in the same direction.
4) Set the bender to make a circular bend, of any size, 1.5" from previous bend. Bend in opposite direction as last bend.
Make: Di-Acro
Model: Model 2 Bender (02HB)
Ace: Needed (Makerhub@georgefox.edu).
Location: Machine Shop
Description
Insert Description Text
Here is an example of this piece of equipment being used.
Insert video media here.
Documentation
Terminology
Insert terminology here
User Manual
Training
Overview
Insert Text
Demonstration
Insert text
General Procedure
Insert text
Safety
Insert text
Certification
Foxtale Quiz
Troubleshooting
Maintenance
General maintenance
Insert text
Specific Maintenance Tasks
| Maintenance Procedure | Frequency | Done By |
|---|---|---|
| Sample | Sample | Sample |