2,418
edits
Changes
Jump to navigation
Jump to search
Line 90:
Line 90: − +
→General Procedure
Trimming the edge of a piece of stock to a flat, smooth, square surface or exactly following the contour of a pattern is one of the router's specialties. Attaching a straightedge or a template to a piece of stock is one of the quickest and most effective ways to clean up an edge, or to perfectly and repeatedly form the arched top of a frame and panel door or any other curved part. Using a router table for edge trimming and pattern work speeds the process by eliminating the need to hold both the workpiece and the pattern down while you make the cut.
Trimming the edge of a piece of stock to a flat, smooth, square surface or exactly following the contour of a pattern is one of the router's specialties. Attaching a straightedge or a template to a piece of stock is one of the quickest and most effective ways to clean up an edge, or to perfectly and repeatedly form the arched top of a frame and panel door or any other curved part. Using a router table for edge trimming and pattern work speeds the process by eliminating the need to hold both the workpiece and the pattern down while you make the cut.
[[File:Wide Groove Router Table.png|400px|right]]
[[File:Wide Groove Router Table.png|500px|right]]
Cutting grooves, slots, dadoes and rabbets, sliding dovetails, mortises and tenons are all part of the router tables stock in trade. If you need to cut a wide groove, click on the image to the right. Start with the inside edge. To avoid a climb cut, consider the second cut when positioning the fence for the first. Push the fence back, then rout the rest. By routing the outer side, the bit continues to push the work against the fence.
Cutting grooves, slots, dadoes and rabbets, sliding dovetails, mortises and tenons are all part of the router tables stock in trade. If you need to cut a wide groove, click on the image to the right. Start with the inside edge. To avoid a climb cut, consider the second cut when positioning the fence for the first. Push the fence back, then rout the rest. By routing the outer side, the bit continues to push the work against the fence.