2,418
edits
Changes
Jump to navigation
Jump to search
Line 67:
Line 67: − +
→Setting the Fence
====Setting the Fence====
====Setting the Fence====
When setting the fence, the router fence does not need to be exactly parallel to the bit for most cuts. This differs greatly from equipment like the table saw or bandsaw which have flat blades instead of a rounded bit. The important thing is to set the fence the proper distance away from the bit, and the bit will do the rest work.
When setting the fence, the router fence does not need to be exactly parallel to the bit for most cuts. Usually, a router bit’s performance is not affected by the angle of the fence. This differs greatly from equipment like the table saw or bandsaw which have flat blades instead of a rounded bit. The important thing is to set the fence the proper distance away from the bit, and the bit will do the rest work.
If your bit has a bearing guide, lay a straightedge against the fence and adjust it until there’s a paper-thin space between the outer edge of the bearing and the straightedge.
If your bit has a bearing guide, lay a straightedge against the fence and adjust it until there’s a paper-thin space between the outer edge of the bearing and the straightedge.