Changes

The F370 is an [[Prototype Lab#FDM Printing Anchor|FDM]] (fused deposit modeling) printer made by Stratasys. It is capable of producing highly accurate parts, whether for prototyping or functional use. The F370 shares the same brand and concept as the [[Dimension 3D Printer|Dimension]] printer, but with subtle differences in operation and maintenance. The F370 boasts the largest build plate in the Prototype lab. Combined with its high accuracy and consistency, the F370 can be left overnight to print multiple parts prepared throughout the day with little worry about print failures.

The F370 is an [[Prototype Lab#FDM Printing Anchor|FDM]] (fused deposit modeling) printer made by Stratasys. It is capable of producing highly accurate parts, whether for prototyping or functional use. The F370 shares the same brand and concept as the [[Dimension 3D Printer|Dimension]] printer, but with subtle differences in operation and maintenance. The F370 boasts the largest build plate in the Prototype lab. Combined with its high accuracy and consistency, the F370 can be left overnight to print multiple parts prepared throughout the day with little worry about print failures.

The Stratasys printers utilize dissolving support material that leaves no surface damage from breaking off supports and allows for creative parts that are impossible on other printers. This printer is a great option for highly detailed or complex parts, parts containing holes that require high tolerances, parts that take advantage of the dissolving support material, bulk prints, or overflow from the Prusa printers when they are full. Currently, the Prototype Lab has two F370 printers available for use.   

The Stratasys printers utilize dissolving support material that leaves no surface damage from breaking off supports and allows for creative parts that are impossible on other printers. This printer is a great option for highly detailed or complex parts, parts containing holes that require high tolerances, parts that take advantage of the dissolving support material, bulk prints, or overflow from the Prusa printers when they are full. Currently, the Prototype Lab has two F370 printers available for use. Printing parts on the F370 costs more than printing on the Prusa printers.  If your part will cost more than $12 to print you will need to get approval from the supervisor on shift.

{{#evu:https://www.youtube.com/watch?v=W8K4YTekXRw}}

{{#evu:https://www.youtube.com/watch?v=W8K4YTekXRw}}