Changes

'''Producing a transfer'''

'''Producing a transfer'''

1. Ensure that the material you are cutting has at least one straight edge and no nails or foreign objects. The straight edge will slide against the fence when ripping.  

1. Open the software you wish to print from (Adobe or Inkscape software).  

2. Measure the width of the board and determine the width of cut desired.   

2. Create or open your desired design.   

3. Lift the locking handle on the fence and slide the fence to the desired cut width using the scale. Make sure you use the scale for the correct side of the blade.    

3. Power on the SG400 printer and give it some time to power up. The printer can take several minutes to warm up.    

4. Lock the fence by pressing down on the locking handle.

4. Lock the fence by pressing down on the locking handle.