1,956
edits
Changes
Jump to navigation
Jump to search
Line 65:
Line 65: − + − − Sweep the floor and welding table when done. − − Make sure to shut off the lights and room ventilation before leaving.
→2. Reset the Space
Now, we understand that sometimes you need to leave projects out. Maybe you are in the middle of a large project and you need something left overnight. In cases like this, it is okay, but you NEED to make prior arrangements with Nick or Justin.
Now, we understand that sometimes you need to leave projects out. Maybe you are in the middle of a large project and you need something left overnight. In cases like this, it is okay, but you NEED to make prior arrangements with Nick or Justin.
Please put back the equipment the way you found it. Make sure the welding gas is SHUT OFF. The welding cables should be neatly wrapped back onto the welders after they have been allowed to cool. Never step on or kink the welding cables and lines.
Please put back the Machinery the way you found it. Clean up chips and any messes you make. NEVER use shop air to clean off the machines.
Always put any unused materials back on the storage shelf, and throw away unusable scrap.
Always put any unused materials back on the storage shelf, and throw away unusable scrap.
Always leave the space better than you found it.
Always leave the space better than you found it.