Changes

* The welding process is burning through the work piece - Double check the welding parameters chart to ensure the wire speed and voltage are correct.  

* The welding process is burning through the work piece - Double check the welding parameters chart to ensure the wire speed and voltage are correct.  

* Trouble starting the weld at the correct distance - Trim the wire to around 1/4" so that the gun can be closer to the work piece.  

* Trouble starting the weld at the correct distance - Trim the wire to around 1/4" so that the gun can be closer to the work piece.  

* Wire feeding at an erratic rate - Readjust drive roll pressure; clean the gun liner and replace if necessary. See the user manual for details on doing this.

* Wire feeding at an erratic rate - Contact the supervisor or tech if you experience this issue.

 

==Maintenance==

==Maintenance==

====General maintenance====

====General maintenance====