53
edits
Changes
Jump to navigation
Jump to search
mLine 78:
Line 78: +
Added item re: slag removal
# Align the pins with the 5 holes of the connector and with the connecting port on the front of the machine (right side).
# Align the pins with the 5 holes of the connector and with the connecting port on the front of the machine (right side).
# To remove, press the silver button and softly pull straight out (do not twist).
# To remove, press the silver button and softly pull straight out (do not twist).
# See item 8 above, use Clean Slag Button to assure test results will be displayed.
TIG:
TIG:
# Grab the cable with TIG torch attached.
# Grab the cable with TIG torch attached.