1,956
edits
Changes
Jump to navigation
Jump to search
Line 48:
Line 48: − [[:File:HandRouterManual890 series.pdf|User Manual]] − − − − − − − − − − − − − − − − − − − − − − − − − − − − − − − − − − − − − −
→Terminology
Occasionally routing can leave burn marks on the workpiece. This usually means that the bit in the router has become dull, let a shop supervisor know if a bit seems dull. Sometimes the burning is due to build up of resin and other gunk (a technical term) on the back of the blade insulating the bit and allowing for heat to build up, make sure to keep bits clean. A final possible cause of burning wood while routing is taking passes that are too slow or setting the router bit speed too high.
Occasionally routing can leave burn marks on the workpiece. This usually means that the bit in the router has become dull, let a shop supervisor know if a bit seems dull. Sometimes the burning is due to build up of resin and other gunk (a technical term) on the back of the blade insulating the bit and allowing for heat to build up, make sure to keep bits clean. A final possible cause of burning wood while routing is taking passes that are too slow or setting the router bit speed too high.
[[Image:RouterBits.jpg|331x331px|left]]
[[Image:RouterBits.jpg|331x331px|left]]
==Training==
==Training==