1,962
edits
Changes
Jump to navigation
Jump to search
→General maintenance
Line 83:
Line 83:
1. Every 10-15 hours of use the blade tension lever should be lubricated.+2. The blade may need to be squared up to the table.+3. The upper arm adjustment screw may need to be adjusted if the upper arm will not stay in the upright position. +4. If the blade slips in the holder frequently it is time to change the blade clamp thumb screw.+
There are several items on the machine that will need attention over time.
There are several items on the machine that will need attention over time.
−* Every 10-15 hours of use the blade tension lever should be lubricated.
−* The blade may need to be squared up to the table.
−* The upper arm adjustment screw may need to be adjusted if the upper arm will not stay in the upright position.
−* If the blade slips in the holder frequently it is time to change the blade clamp thumb screw.
====Specific Maintenance Tasks====
====Specific Maintenance Tasks====