Changes

File:battcon.jpg|[https://www.xump.com/science/9V-Battery-Snap-Connector-Leads.cfm?SID=12&gclid=EAIaIQobChMI04mUoZaF2QIVAm5-Ch0pDgDrEAQYAiABEgKI1_D_BwE 9V Battery connector]

File:battcon.jpg|[https://www.xump.com/science/9V-Battery-Snap-Connector-Leads.cfm?SID=12&gclid=EAIaIQobChMI04mUoZaF2QIVAm5-Ch0pDgDrEAQYAiABEgKI1_D_BwE 9V Battery connector]

File:Blinking LED Circuit.gif|Completed PCB

File:Blinking LED Circuit.gif|Completed PCB

</gallery><figure-inline><figure-inline><figure-inline><figure-inline>[[File:Soldering_course_circuit.jpg|583x583px]]</figure-inline></figure-inline></figure-inline></figure-inline>

</gallery>

<figure-inline><figure-inline><figure-inline><figure-inline></figure-inline></figure-inline></figure-inline></figure-inline>

====General Procedure====

====General Procedure====

# Acquire a soldering station. For this procedure, this particular station will be referenced.

# Acquire a soldering station. For this procedure, this particular station will be referenced, the Weller WES51. .<figure-inline class="mw-default-size">[[File:...solderingiron.png|300x300px]]</figure-inline>

 

# You can power it on using the switch on the left and control the temperature in °F using the temperature knob on the right. 350 °F is a good temperature to keep it at. When the light is solid green, the iron is not heated up yet. When it is heated to the temperature you set on the temperature knob, it will start blinking green.

==Safety==

==Safety==

# Soldering Irons can get up to 1000 °F. This is really hot, so do not touch it. Any metal thing on the iron is hot. Be sure to hold the iron like a pencil, and ONLY hold it by the handle.

# Soldering Irons can get up to 1000 °F. This is really hot, so do not touch it. Any metal thing on the iron is hot. Be sure to hold the iron like a pencil, and ONLY hold it by the handle.