Changes

# Close the heat press and wait until the timer expires.

# Close the heat press and wait until the timer expires.

# Remove the material from the heat press.

# Remove the material from the heat press.

# Carefully pull off the heat transfer paper, making sure to keep a steep angle so that the graphic does not peel off (See Figure 2). This can be done while the material is hot or cold.  

# Carefully pull off the heat transfer paper, making sure to keep a steep angle so that the graphic does not peel off. This can be done while the material is hot or cold.  

# Reset the space by turning off the heat press, leaving it open, and wiping off any dust or other debris as needed.  

# Reset the space by turning off the heat press, leaving it open, and wiping off any dust or other debris as needed.  

#  

#