32
edits
Changes
Jump to navigation
Jump to search
→Procedure
Line 40:
Line 40:
3) Set the bender to make a circular bend, of any size, 1.5" from previous bend. Bend in opposite direction as last bend.+
+
==Procedure==
==Procedure==
1) Cut a piece of .5"x.125" aluminum to a length of 6".
1) Cut a piece of .5"x.125" aluminum to a length of 6".
+
2) Set the bender to make a 90<sup>o</sup> bend at 0.5" from the end of material;proceed to bend.
2) Set the bender to make a 90<sup>o</sup> bend at 0.5" from the end of material;proceed to bend.
+
3) Make another 90<sup>o</sup> bend at 1.5" from previous bend. Make bend in the same direction.
3) Make another 90<sup>o</sup> bend at 1.5" from previous bend. Make bend in the same direction.
−4) Set the bender to make a circular bend, of any size, 1.5" from previous bend. Bend in opposite direction as last bend.