191
edits
Changes
Jump to navigation
Jump to search
Line 27:
Line 27: − +
→Shearing Steps
#Make sure the table and floor are clear prior to shearing.
#Make sure the table and floor are clear prior to shearing.
#Mark your piece, place it on the right side of the table, and slide your piece in till your cut line is directly under the blade and against the side guard. Make sure your fingers stay out of the clampdown or you can accidentally crush your fingers if not careful.
#Mark your piece, place it on the right side of the table, and slide your piece in till your cut line is directly under the blade and against the side guard. Make sure your fingers stay out of the clampdown or you can accidentally crush your fingers if not careful.
#With your fingers holding the piece, use the yellow handle to clamp down on your piece.
#With your fingers holding the piece, use the yellow handle to clamp down on your piece. If the piece is extremely long, ask for assistance.
#Press down on the pedal with your foot until the shear completely cuts your piece. Before the blade engages the piece, make sure that your piece if held securely by the clampdown.
#Press down on the pedal with your foot until the shear completely cuts your piece. Before the blade engages the piece, make sure that your piece if held securely by the clampdown.
#Collect all of your pieces and deburr.
#Collect all of your pieces and deburr.