Changes

#Adjust the clamping force and the clamping handle to allow room to insert your work piece.

#Adjust the clamping force and the clamping handle to allow room to insert your work piece.

#Insert your work piece to the line you want to bend, centered in the brake, and clamp your piece securely.

#Insert your work piece to the line you want to bend, centered in the brake, and clamp your piece securely.

#Pull up on the bending handle slowly until your piece is bent to the desired angle, and slowly lower the leaf.

#Pull up on the bending handle of the leaf slowly until your piece is bent to the desired angle, and slowly lower the leaf.

#Adjust the clamp handle, and remove your piece.

#Adjust the clamp handle, and remove your piece.

#Put back any fingers if adjusted, and deburr if any rough edges are left.

#Put back any fingers if adjusted, and deburr if any rough edges are left.