42
edits
Changes
Jump to navigation
Jump to search
Line 32:
Line 32: − + + + + + + + + + + + Line 41:
Line 51: − ==== Preparing the F370 ====+
Started workflow
=== Workflow Chronology ===
=== Workflow Chronology ===
==== Acceptable Prints ====
The basic workflow for using the F370 will be as follows:
* Preparing the Printer
* Preparing Your File for Print
* Printing Your Part
* Soaking Your Part
Each section below will have specific information relevant to each step. You are encouraged to speak with a lab volunteer for advice and guidance for any step of the process.
==== Preparing the F370 ====
* Acceptable Prints
** Your part should be run by a lab volunteer to ensure the F370 or Dimension is the best printer option. Generally, a part will need to be printed on the F370 or Dimension printer if it is too complex for a Prusa, takes advantage of the dissolving support material, or you are otherwise instructed to do so by a lab volunteer. Feel free to ask a lab volunteer if you need help deciding which printer to print your part on.
==== Using GrabCAD ====
==== Using GrabCAD ====
==== Touchscreen Operation ====
==== Touchscreen Operation ====
==== Water Bath Workflow ====
==== Water Bath Workflow ====