124
edits
Changes
Jump to navigation
Jump to search
Line 95:
Line 95: − +
→Safety
== Safety ==
== Safety ==
*Laser cutting or engraving of many materials can create hazardous fumes. These fumes may be dangerous to breathe and can damage the FabLight. Consult Manufacturer’s Safety Data Sheets (MSDS) for all materials before laser cutting. The user of the FabLight is responsible for exhaust ventilation and removing cutting fumes from the working area. Before operating the FabLight, make sure that the exhaust system working properly.
*Laser cutting or engraving of many materials can create hazardous fumes. These fumes may be dangerous to breathe and can damage the FabLight. Consult Manufacturer’s Safety Data Sheets (MSDS) for all materials before laser cutting. The user of the FabLight is responsible for exhaust ventilation and removing cutting fumes from the working area. Before operating the FabLight, make sure that the exhaust system is working properly.
*There are often sharp edges left on the material from the cutting process. Be careful handling a fresh cut piece and use the deburring tools to remove any sharp edges.
*There are often sharp edges left on the material from the cutting process. Be careful handling a fresh cut piece and use the deburring tools to remove any sharp edges.
*On a similar note a fresh cut piece is usually hot so check the temperature with the back of your hand before picking it up.
*On a similar note a fresh cut piece is usually hot so check the temperature with the back of your hand before picking it up.