Pedestal Grinder
A pedestal grinder is a type of grinding machine used to drive abrasive wheels. This type of grinder is mounted on a pedestal, which may be bolted to the floor or may sit on rubber feet. Baldor buffers are built rugged for demanding work loads. 1,800 RPM buffers offer the ultimate in buffer flexibility. Excellent for polishing and buffing metal, aluminum, brass and copper. Single phase 3/4 HP 115/230 volt motor.
The current Ace of the Pedestal Grinder is Needed (Makerhub@georgefox.edu).
Documentation
- Baldor Pedestal grinder manual [1]
Procedures
- Ensure that the pedestal grinder is stable
- Ensure that all the guards are in place before turning on
- Make sure that the wheel turns freely before using
- Turning on the wheel, stand to the side of the machine and wait for it to come to full speed
- Bring work into contact with the grinding wheel slowly and smoothly, without bumping
- When grinding move back and forth across the face of the wheel. This prevents even wear on the wheel and prevents grooves from forming in your work piece
- Once done using, turn off the grinder and wait for it to come to a complete stop
Make: Baldor
Model: 332B
Ace: Needed (Makerhub@georgefox.edu).
Location: Welding Shop
Description
Insert Description Text
Here is an example of this piece of equipment being used.
Insert video media here.
Documentation
Terminology
Insert terminology here
User Manual
Training
Overview
Insert Text
Demonstration
Insert text
General Procedure
Insert text
Safety
Insert text
Certification
Foxtale Quiz
Troubleshooting
Maintenance
General maintenance
Insert text
Specific Maintenance Tasks
| Maintenance Procedure | Frequency | Done By |
|---|---|---|
| Sample | Sample | Sample |