Property:Has description
Jump to navigation
Jump to search
T
The impact Driver is specially designed for tightening and loosening various hex-head bolts, nuts, and lag screws. It employs both rotational force (torque) and short-burst concussive blows (impacts) to deliver an unparalleled amount of power. +
ARM training board used in ENGE320. Coupled with the Arduino Zero. Shield includes an AMOLED display, joystick, DPAD, RGB LED's, accelerometer, SD Card slot, and a piezo buzzer. +
A multimeter is a measuring instrument that can measure multiple electrical properties. A typical multimeter can measure voltage, resistance, and current, in which case can be used as a voltmeter, ammeter, and ohmmeter. Some feature the measurement of additional properties such as temperature and capacitance. +
Chronos high-speed cameras are known for their ability to capture video at extremely high frame rates, allowing for slow-motion effects and detailed analysis of fast-moving events. +
This is an instrument that is used to measure revolutions per minute or RPM. This is a non contact device that uses light and a reflector. This device can be used to measure the RPM of a motor shaft. +
For Going Pro. Takes Video and Pictures. Can be used with the GoPro Accessories in the GoPro accessory kit. +
This is an electronic instrument for detecting and measuring ionizing radiation with the use of a Geiger–Müller tube +
A torque wrench is a tool used to apply a specific torque to a fastener such as a nut, bolt, or lag screw. +
Arduino Uno is an open-source microcontroller board based on the Microchip ATmega328P microcontroller. It is a Single circuit board that can be programmed and comprises of 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header and a reset button. +