Sewing Machine

Janome 3160 QDC

Make: Janome

Model: 3160QDC

Serial Number: 8H2036666 / 8H2036653

Ace: Brooke Frisk (bfrisk24@georgefox.edu).

Location: The Hub

Description

There are currently four Janome 3160 QDC sewing machines available for use in the Maker Hub. These machines feature 60 different stitch patterns. It has automatic fabric feeding, one hand needle threader and easy to follow instructions, making it an ideal machine for first time sewers. Some of its more advanced features include buttons for lock stitch, needle up or down and automatic thread cutting. It has a add on platform that can be attached to make sewing larger materials a breeze.

Here is an example of this piece of equipment being used.

Documentation

Sewing Machine User Manual

Product Home Page

Terminology

Spool - Holder used for thread.
Bobbin - Cylinder or spindle holder in which thread is wound thread that comes from the bottom
Presser foot - piece of metal that keeps fabric in place when sewing.

Training

All information on these specific machines can be found in the User Manual and on the Product Home Page

How to set up the machine. This video shows a similar set up process to our machines, but be sure to compare to the manual.

A quick video on basic stitching techniques:

YouTube is a great resource for learning new things. If you are new to sewing, try watching a few videos to get a general understanding before jumping into sewing.

Operation

Winding the bobbin

Once you picked the type/color of thread spool, first get some of it loose and out and secondly place it on the large spool holder (skinny tub). Then, add the spool cap. It's side will depend on the type/ style of thread spool you picked.
As you follow the guide images, put the thread around the metal knob (upper thread guide). Then slide the thread through one of the holes in the bobbin and place it in the bobbin winder spindle (small metal tube) that its on the right top of the machine. Slide the bobbin winder shaft over to lock it.
Hold the thread for couple seconds at the beginning as you press the foot pedal gently and slowly. Once it becomes even or uniform, you can let go of the thread and go faster with the foot pedal.
Cut the thread once you are done and place the bobbin in the bobbin case. The drop in bobbin is covered by a plastic cover that you can remove by gently pulling the hook cover release button. Drop the bobbin and wrap the thread around a the clip under the plastic cover. Then, put the cover on.

Threading the machine

Grab onto the thread from the thread spool and run the thread through the knob and going down then up, following the image guide around and make sure it is catching all parts. At the end thread the needle.

Demonstration

The demonstration will include several steps. Demonstrate you can safely setup the sewing machine, which includes winding the bobbin, threading the machine, and removing/replacing the needle. Finally, sew a mini pillow.

General Procedure

Wind the bobbin and thread the machine
Pick 2 pieces of fabric and turn them inside out (flip them) because when you sew it you turned it back inside out in order to not see the seams. Line those 2 pieces up.
Pick an edge that you will not turned inside out and therefore not sew until the end. Start sewing from that right edge going clockwise direction. You can use the basic stitch since you will not see it anyways.
When you get to the corner, press stop and wait until the machine stops. Make sure the needle is down and put the kickstand up. Rotate the piece and then put the kickstand down again and continue. Do the same thing to do the last side and press stop. Wait until the machine stop and you are done. Cut the ends and pull it inside out
Put he stuffing inside and fold the insides of the edge that is open and put pins to hold it into place and start sewing the last side.

Safety

There are several hazards you need to be aware of when using a sewing machine.

Keep your fingers away from moving parts.
Never place your finger under the needle.

Certification

Canvas Quiz

Troubleshooting

There are many different types of problems you can have while using a sewing machine, but here are a few basic problems.

1. The needle thread breaks: Check the threading of the needle as it may not be threaded properly.

2. The needle breaks: Make sure the needle is installed correctly and is tight. Verify you are using the correct pressure foot.

3. Machine does not run smoothly: Verify the hook race and bobbin holder are free from lint.

Maintenance

General maintenance

Keep the sewing machine clean and free from lint. Make sure to reset the space when you are done sewing.

Specific Maintenance Tasks

Maintenance Procedure	Frequency	Done By
Lubricate mechanisms	Semester	Tech
Clean machine interior	Monthly	Tech
Change the needle	As Needed	Tech