Pick and Place

Pick and Place Machine

Make: LPKF

Model: Protoplace S

Ace: Isaac Beals (ibeals16@georgefox.edu).

Location: PCB Lab

Description

Pick & Place (Protoplace S) is a semi-automatic pick & place system for the professional assembly of Surface Mount Technology (SMT) printed circuit board prototypes and small batch projects. It is capable of dispensing solder paste, glues, and adhesives, but we typically use it just for placing minuscule components on PCBs.

Documentation

Terminology

1. Micro-Table
   1. This clamps PCBs as large as 297mm x 420mm (11.8” x 16.5”). Knobs at the front of the micro-table allow for fine adjustments along the X and Y axes, which are ideal for the placement of complex components.
2. Manipulator
   1. The manipulator is what picks & places components. It is also capable of dispensing solder paste, glues, and adhesives with the dispenser attachment, however, we will not use these features. The manipulator is can reach everywhere on the micro-table that will be needed for projects, including the turntable. The manipulator uses the vacuum and appropriate needle attachment in order to pick & place components.
3. Manipulator Knob
   1. The knob above the box on the manipulator rotates the nozzle; so it rotates components sucked on the knob.
4. Turntable
   1. The turntable is what houses the components used in the project. The turntable can be controlled using the keyboard and LCD display.
5. Micro Camera and Monitor
   1. The micro camera captures the end of the nozzle so that you can view (on the monitor) an accurate representation of where the component will be placed.

Pick and Place Datasheet

Pick and Place Manual

Training

Overview

Insert Text

Demonstration

Insert text

General Procedure

Insert text

Safety

Insert text

Certification

Foxtale Quiz

Maintenance

General maintenance

Insert text

Specific Maintenance Tasks

Maintenance Procedure	Frequency	Done By
Sample	Sample	Sample

Pick and Place Machine

The LPKF ProtoPlace S is an ergonomically designed, semi-automatic pick & place system for the professional assembly of SMT printed circuit board prototypes and small batch projects. The ProtoPlace S quickly assembles SMT boards, with the user controlling each step of the assembly process through an LCD display.

The current Ace of the Pick and Place is Isaac Beals (ibeals16@georgefox.edu).

Documentation

• Product Home Page
• Datasheet