Markforged 3D Printer

From maker-hub
Revision as of 16:15, 10 October 2018 by Glorenzo16 (talk | contribs) (Glorenzo16 moved page Markforged to Markforged 3D Printer)
Jump to navigation Jump to search
Mark 2 3D printer.png
The Mark II machine by Markforged.

Dimension is designed with ultimate simplicity in mind. The system enables you to build parts quickly, even if you’ve never used a 3D printer before. Its display panel prompts you to press a few keys to get you modeling quickly. The system models with ABS plastic, so modeled parts are strong and durable. ABS also ensures you’ll be able to drill, tap, sand, and paint your creations. With the speed and convenience of Breakaway Support Technology (BST) or Soluble Support Technology (SST), your completed parts are quickly available for review and test. [1].


Documentation

Training

TBD

Each bottle of sodium hydroxide should contain approximately 250 g. After the tank is cleaned, add water FIRST to the tank and then pour the sodium hydroxide ON TOP of the water. DANGER: Reversing this process causes a DANGEROUS chemical reaction.

Mentors Only

This section will be for information that pertains only to Aces and Mentors.




  1. Description taken from Stratasys