Difference between revisions of "Windchimes"
Cpainter17 (talk | contribs) |
Cpainter17 (talk | contribs) |
||
| Line 37: | Line 37: | ||
<br> | <br> | ||
<br> | <br> | ||
| − | <strong>Step 2:</strong> Select the | + | <strong>Step 2:</strong> Select the Top Plane in the design tree (the left column on your screen) to begin your sketch. Click on the Sketch tab above and click Sketch. |
| − | [[File: | + | [[File:Chimes 2.png|1400px|none]] |
| + | |||
| + | <br> | ||
| + | <br> | ||
| + | <strong>Step 3:</strong> We are going to start with the main hanger. | ||
| + | The first circle is going to be centered at the origin. Select the circle command in the sketch pane. Where you select is going to be the center of the circle, so click the origin and build out the circle at any size. | ||
| + | [[File:Chimes 3.png|1400px|none]] | ||
| + | |||
| + | <br> | ||
| + | <br> | ||
| + | <strong>Step 4:</strong> Using the Smart dimension tool, make the diameter of the circle 2 in | ||
| + | [[File:Chimes 4.png|1400px|none]] | ||
| + | <br> | ||
| + | Offset the circle inwards a distance of 0.15 in | ||
| + | [[File:Chimes 5.png|1400px|none]] | ||
Revision as of 12:32, 14 June 2021
This TV will have you draw the chimes in SolidWorks, cut them in the Laser Cutter, and build your own set of windchimes using acrylic discs and pre-made chimes.
Procedure
Buckle up...
SolidWorks
Step 1: Open SolidWorks 2020, and select a new part. Don't forget to save your file frequently as you go. In the bottom-right corner of your Solidworks window, set the units to IPS (inch, pound, second).
Step 2: Select the Top Plane in the design tree (the left column on your screen) to begin your sketch. Click on the Sketch tab above and click Sketch.
Step 3: We are going to start with the main hanger.
The first circle is going to be centered at the origin. Select the circle command in the sketch pane. Where you select is going to be the center of the circle, so click the origin and build out the circle at any size.
Step 4: Using the Smart dimension tool, make the diameter of the circle 2 in
Offset the circle inwards a distance of 0.15 in
